From: Rob Brown (Rob.Brown@ioko.com)
Date: Mon Feb 19 2007 - 08:45:46 EST
Hi,
I've got two separate arrays that I have the same problem with. I tip
from the sun host to the 3310 or 3520 array and it normally works fine:
`tip -38400 /dev/cua/b`. However on occasion it connects (so it's not a
problem with tip) and sits there ignoring all key presses. I can tell
I'm connected to the array as the clock in the top left hand corner of
the array config screen keeps incrementing, I just can't seem to
interact with the array at all. The usual ctrl + s ctrl +q have no
effect.
Anyone have any ideas?
Regards
rob brown
ioko
---------------------------------------------
1, Innovation Close,
Science Park,
Heslington
Yorkshire YO10 5ZD
---------------------------------------------
* rob.brown@ioko.com | * 07769 711 885 | * 01904 438 000
Communications on or through ioko's computer systems may be monitored or
recorded to secure effective system operation and for other lawful purposes.
Unless otherwise agreed expressly in writing, this communication is to be
treated as confidential and the information in it may not be used or disclosed
except for the purpose for which it has been sent. If you have reason to
believe that you are not the intended recipient of this communication, please
contact the sender immediately. No employee is authorised to conclude any
binding agreement on behalf of ioko with another party by e-mail without prior
express written confirmation.
ioko365 Ltd. VAT reg 656 2443 31. Reg no 3048367. All rights reserved.
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:41:40 EDT