From: Dave Martini (martini@mrpeabody.llnl.gov)
Date: Mon Jan 29 2007 - 19:32:18 EST
Veritas Volume Manager is smart enough to recognize the volume
configuration information on a disk array attached to a system in the
event that the system disk is not mirrored and needs to be replaced
because the state database copy is on all disk drives.
Is this the case with disksuite if the state database is copied onto one
of the disks in the array?
Will the volumes in the array show up automatically and will metastat
show them after installing a new boot disk and re-installing the OS?
Thank You.
Dave Martini
LLNL
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:41:33 EDT