WARNING: /proc could not be mounted

From: Ian Topham (Ian.Topham@Digica.com)
Date: Fri Jan 12 2007 - 06:03:37 EST

• Next message: Matthew.Darcy@arval.co.uk: "(UPDATE): Link Location Sun Storedge PCI Dual Ultra3 SCSI Card (possibly)"
• Previous message: ramesh kurup: "senmail issue"
• Next in thread: Ian Topham: "Summary: WARNING: /proc could not be mounted"
• Reply: Ian Topham: "Summary: WARNING: /proc could not be mounted"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Gurus
    I am in the process of configuring a v210 system with Solaris 9 9/04
and then applying the patch cluster which contains the kernel patch
118558-20, please don't ask why.
I've installed the OS, mirrored the disks and installed the patch
cluster.
After rebooting the system I now get this: -

Rebooting with command: boot
Boot device: /pci@1c,600000/scsi@2/disk@1,0:a File and args:
SunOS Release 5.9 Version Generic_118558-20 64-bit
Copyright 1983-2003 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
WARNING: forceload of misc/md_trans failed
WARNING: forceload of misc/md_raid failed
WARNING: forceload of misc/md_hotspares failed
WARNING: forceload of misc/md_sp failed
Hardware watchdog enabled
Configuring ATM interfaces:
configuring IPv4 interfaces: bge0.
Hostname: webbox
Illegal Instruction
Illegal Instruction
Illegal Instruction
Illegal Instruction
Illegal Instruction
Illegal Instruction
WARNING: /proc could not be mounted
Illegal Instruction
Illegal Instruction
Bus Error
The / file system (/dev/md/rdsk/d10) is being checked.
Bus Error

WARNING - fatal error from fsck - error 138
Unable to repair the / filesystem. Run fsck manually
(fsck -F ufs /dev/md/rdsk/d10). System will reboot when you exit the
shell.

Type control-d to proceed with normal startup,
(or give root password for system maintenance):

Is there a 'get out of jail' procedure for this problem, or do I have to
go to site to rebuild the system?

I've tried the fsck option, but I get a Bus Error when I attempt it.

Any Ideas?

Thanks - Ian

This email is confidential and may be privileged. If you are not the intended
recipient please notify the sender immediately and delete the email from your
computer.

You should not copy the email, use it for any purpose or disclose its contents
to any other person.
Please note that any views or opinions presented in this email may be personal
to the author and do not necessarily represent the views or opinions of
Digica.
It is the responsibility of the recipient to check this email for the presence
of viruses. Digica accepts no liability for any damage caused by any virus
transmitted by this email.

UK: Phoenix House, Colliers Way, Nottingham, NG8 6AT UK
Reception Tel: + 44 (0) 115 977 1177
Support Centre: 0845 607 7070
Fax: + 44 (0) 115 977 7000
http://www.digica.com

SOUTH AFRICA: Building 3, Parc du Cap, Mispel Road, Bellville, 7535, South
Africa
Tel: + 27 (0) 21 957 4900
Fax: + 27 (0) 21 948 3135
http://www.digica.com
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers

• Next message: Matthew.Darcy@arval.co.uk: "(UPDATE): Link Location Sun Storedge PCI Dual Ultra3 SCSI Card (possibly)"
• Previous message: ramesh kurup: "senmail issue"
• Next in thread: Ian Topham: "Summary: WARNING: /proc could not be mounted"
• Reply: Ian Topham: "Summary: WARNING: /proc could not be mounted"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:41:27 EDT