From: Hutten, Rob (Rob.Hutten@nrc-cnrc.gc.ca)
Date: Wed Jan 03 2007 - 10:02:01 EST
Sunfolks,
We are connecting our new StorEdge 3511 SATA array to our E20K via
fibre. I cannot find the specs for the required fibre cable in any of
the documentation, paper or online. What type of fibre optic cable does
it require: 50micron, 50micron enhanced, or 62.5 micron? Also, duplex or
not? These questions are being posed to me by our fibre vendor, and
Sun's online support hasn't responded to my query after 15 days.
Also, our intent is to add this storage to our existing zpool which is
built over a couple multipathed 6120 arrays. Any issues with mixing our
non-multipathed 3511 and our pre-existing multipathed 6120 arrays in the
same zpool?
Many thanks; I'll summarize as per usual.
Cheers,
-Rob
Rob Hutten
Research Informatics, Institute for Marine Biosciences
National Research Council of Canada
Halifax, Nova Scotia
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:41:25 EDT