From: Niranjan Parulekar (niranjan.p@emirates.com)
Date: Sun Dec 17 2006 - 01:48:46 EST
You can still use sendmail.cf in /etc/mail to set your relay host.
Just define you host as DSyour_relay_host.com
Else you can also define it in the sendmail.mc as
define(`smart_host',`your_relay_host.com')
Then build a new configuration file & substitute the old one with this.
Regards
Niranjan
-----Original Message-----
From: sunmanagers-bounces@sunmanagers.org
[mailto:sunmanagers-bounces@sunmanagers.org]
Sent: 14 December 2006 21:23
To: sunmanagers@sunmanagers.org
Cc: Susan.Thielen@wellsfargo.com
Subject: Sendmail on Solaris 10
I have a pretty simple setup, but the main problem is Sendmail in
Solaris 10 is m4 based. I just want a very simple subsidiary cf and a
main cf file. I have a few machines in a datacenter, and I want all the
mail there to relay through a relay machine, called relay01, so that the
non-local mail goes out through there, and goes to the ISP's relay and
then either out to the world or the companies domain.
And I just can't figure out all the m4 stuff and that..
Does someone have a primer on just how to do this?
Some pointers? In the old days, this was no sweat, but now... argh.. I'm
sure it's easy, but I've been working on it for a couple weeks with poor
results..
Thanks!
Sincerely,
Susan KJ Thielen
ISD - Investment Technology/ISG
Wells Fargo
45 Fremont Street 12th Floor
San Francisco, CA 94105-2204
Office : 415-947-5089
Cell : 650-224-3446
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:41:22 EDT