From: Andrew Bergman (andrew.bergman@microlistics.com.au)
Date: Mon Dec 04 2006 - 00:31:07 EST
Thanks to Steve for the solution that worked.
Thanks also to Chuck Norem and Adrian Cole for their suggestions.
Cheers
Andy
Steve Sandau wrote:
>> One of our clients has a Laserjet 5M network printer that is used
>> solely for our application to print reports. Our app runs on Solaris
>> 9 x86
>>
>> /etc/printers.conf
>>
>> ddocs:\
>> :bsdaddr=<ip address>,raw1,Solaris
>>
>> Is this something that can be done on the server or is it a printer
>> config change? Our access to the printer is remote via telnet only
>> and I am not sure how I would go about making a change there.
>>
>
> You may be able to change 'raw1' in the printers.conf to 'text'
> instead. I seem to remember that jetdirect printers have a text and a
> raw 'device,' with the text one fixing the stairstep problem of a Unix
> print job.
>
> Steve
-- Andrew Bergman Systems Administrator Microlistics Pty Ltd Direct: +61 3 8329 2050 Mobile: +61 411 706 713 Fax: +61 3 9326 7588 e-mail: andrew.bergman@microlistics.com.au -------------------------------------- "It is the way of the world, Baldrick - the abused always kick downwards. I am annoyed, and so I kick the cat... the cat pounces on the mouse, and finally, the mouse bites you on the behind." _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:41:17 EDT