From: Andy Malato (andym@oak.njit.edu)
Date: Fri Dec 01 2006 - 06:40:21 EST
Thanks to the following who provided answers to my question :
Kevin Van Der Hart
Joe Fletcher
Charles Mengel
A suggestion was to run :
/usr/platform/`uname -i`/rsc/rscadm resetrsc
but this had no effect.
The outcome is that the card is most likely bad.
Original Question :
I'm encountering some problems when attempting to setup an RSC card in a
Sun-Fire-280R. I suspect that the card may be bad, but wanted to get
some feedback to see if in fact the problem could be something other than
the card. I've configured these cards on other Sun-Fire-280R systems
without a problem.
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:41:16 EDT