From: Rolando Riley (rriley@ayayai.com)
Date: Mon Jul 15 2002 - 15:31:43 EDT
Hello:
I have been turning on circles with this SunBlade 100. My
problem is that at OBP , each time I do
-----
ok boot cdrom
---- I get the well known error : Can't read disk label This message is then followed by the also well known message: Can't open boot device Many times this error is associated with a 1) Wrong device path 2) Wrong Media CD. Device Path: ok show-disks a) /pci@1f,0/ide@d/cdrom b) /pci@1f,0/ide@d/disk ok probe-ide Device 0 (Primary Master) ATA Model: ST315320A Device 1 ( Primary Slave ) Atapi: LTN485S The device path of cdrom is : /pci@1f,0/ide@d/cdrom@1,0:f What could be wrong? I see the light of CDROM turning on when It attempts to boot .. but nothing. cheers, R. Riley ______________________________________________ Ayayai.com Ultra, tu Internet prepago LIBRE DE PUBLICIDAD http://www.ayayai.com/ultra _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:24:35 EDT