From: Chris cc (lazyboy_2k@yahoo.com)
Date: Mon Nov 20 2006 - 19:37:03 EST
Hi Ian & All,
How do I load the FCode onto the hba? I thought that loading the qla driver & boot -r are good enough, ain't it? If it's, I already did; hence I saw the interface during boot up. However, the issue is that I can't see it when I run probe-scsi-all cmd.
I already set auto-boot=false & run reset-all several times, but I still haven't gotten what I expect to see.
ok setenv auto-boot? false
auto-boot? = false
ok reset-all
Resetting ...
Sun Ultra 5/10 UPA/PCI (UltraSPARC-IIi 300MHz), No Keyboard
OpenBoot 3.31, 640 MB (60 ns) memory installed, Serial #9680239.
Ethernet address 8:0:20:93:b5:6f, Host ID: 8093b56f.
ok
ok probe-fcal-all
probe-fcal-all ?
ok probe-scsi-all
ok probe-pci
Could you please tell me where do I obtain the patch for fcode & upload it to hba or get it to see at obp? Any helps/suggestions are appreciated.
Thanks a lot,
-Chris
Ian McNish <ian@ians.net> wrote:
you will need to obtain and load the FCode on to the HBA before you will
be able to see the HBA, or attached devices, from the boot PROM.
NOTE: this is only necessary if you either (a) wish to see the HBA or
attached devices from the boot PROM or (b) wish to boot from a device
attached to the HBA.
-- Ian McNish ian@ians.net http://www.ians.net Chris cc wrote: > Any helps on this? ..... Appreciate your inputs/helps.. > > Hi, > > I just installed 2 qla2340 pci hba into my ultra 10 with OBP 3.29 & set > diag-switch=true. During the boot up sequence, I see both 2 qla2340 > pci hba cards; however, when I run: > > OK probe-scsi-all > (return nothing) > OK probe-pci <=== system hang > > I had to powercycle the box & run: > > OK probe-pci-slot /pci@1f,0/pci@1 > Fast data Access MMU Miss > OK ls /pci@1f,0/pci@1 > f009ee90 fiber-channel@3 > f009eb2c fiber-channel@2 > f007e1c8 pci1@1 > > Question: Is there a way to fix this problem so that probe-scsi-all > can see my hba? Any helps are appreciated. > > TIA, > -Chris --------------------------------- Sponsored Link Mortgage rates near 39yr lows. $310,000 Mortgage for $999/mo - Calculate new house payment _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:41:13 EDT