From: Simon J. Loewenthal (Simon.Loewenthal@vcint.com)
Date: Tue Nov 21 2006 - 04:46:52 EST
Dear all,
A new T2000 server arrived here and I decided to configure the h/w RAID
as a mirror.
Usually "0 1 create-im-volume" works, but it looks like the LSILogic
card isn't there and might have been replaced by something else.
I think that the T2000 without the LSI Logic controller (a PCI card) has
been replaced with some type of onboard RAID controller. Would someone
know how I could go about setting up the controller? The LSI Logic card
ought to have identified itself as
/pci@7c0/pci@0/pci@1/pci@0,2/LSILogic,sas@2, but our new T200 only shows
/pci@7c0/pci@0/pci@1/pci@0/ide@8
{e} ok show-disks
a) /pci@7c0/pci@0/pci@1/pci@0/ide@8/cdrom
b) /pci@7c0/pci@0/pci@1/pci@0/ide@8/disk
c) /pci@780/pci@0/pci@9/scsi@0/disk
q) NO SELECTION
Enter Selection, q to quit: q
{e} ok select /pci@7c0/pci@0/pci@1/pci@0/ide@8
{e} ok 0 1 create-im-volume
ok ?
The create-im-volume is unrecognised.
With regards, S.L.
______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email
______________________________________________________________________
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:41:13 EDT