From: aams listastecnicas (aams.listastecnicas@gmail.com)
Date: Mon Nov 13 2006 - 18:11:35 EST
Hi,
I have six machines with solaris 8 and 9 attached to one library with 6 LTO3
drives, 2 LTO2 drives and 1 SDLT drive through an scsi-fiber converter
Solaris create the /dev/rmt devices for all LTO drives, but not for SDLT
The next es the output of luxadm -e dump_map command for the hba.
Pos Port_ID Hard_Addr Port WWN Node WWN Type
0 10000 0 500308c001cc3002 500308c001cc3001 0x1 (Tape device)
1 10100 0 500308c001cc3008 500308c001cc3007 0x1 (Tape device)
2 10200 0 500308c001cc300e 500308c001cc300d 0x1 (Tape device)
3 10300 0 500308c001cc3014 500308c001cc3013 0x1 (Tape device)
4 10400 0 500308c001cc301a 500308c001cc3019 0x1 (Tape device)
5 10500 0 500308c001cc3020 500308c001cc301f 0x1 (Tape device)
6 10600 0 500308c001cc3026 500308c001cc3025 0x1 (Tape device)
7 10700 0 500308c001cc302c 500308c001cc302b 0x1 (Tape device)
8 10800 0 2001006045175b68 1000006045175b68 0x0 (Disk device)
9 11800 0 10000000c92ee277 20000000c92ee277 0x1f (Unknown
Type,Host Bus Adapter)
For the position 8, the type of device show "Disk Device" when this it is
the SDLT drive
I install patches to"st" for both version of solaris.
Somebody knows if something special configuration is needed for sdlt drive
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:41:10 EDT