From: ssloh@singnet.com.sg
Date: Fri Oct 20 2006 - 07:09:07 EDT
Seem like nobody got the answer for sun storEdge 6130. I think this storage is not up to enterprise class and the designer is not thorough enough to think how can customer accomplish below task with paramater login into sscs !!!
For example, HDS and EMC which allows user password as a parameter to login then do shadowimage or truecopy via scripting.
Sun sscs don't have this kind of capability. Or how Sun customers accomplish similar tasks as compare to HDS and EMC customers..????
----- Original Message -----
From: "ssloh" <ssloh@singnet.com.sg>
To: <sunmanagers@sunmanagers.org>; "solaris-l" <solaris-l@Groups.ITtoolbox.com>
Sent: Friday, October 13, 2006 3:52 PM
Subject: sun storage sscs script
Hi folk,
I am trying to write a storage scripts using sscs to do the following on my SE6130
1. To put the DB into hot backup mode
2. To resnap the DB volumes in the storage
3. To put the DB back to normal
4. Mount the DB volume to backup server
Once completed the backup, unmount DB volumes from backup server.
If somebody willing to share the scripts in order to accomplish above job would be very much appreciated.
Similar scripting using sscs will be helpful too :) thanks a lots
While I am trying this command #sscs login -h localhost -u root
It prompted me the root password, how to pile in the password without user interaction for the script ?
I had tried #echo rootpassword | sscs login -h localhost -u root it does not work, any other suggestions ?
Best Regards
ssloh
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:41:03 EDT