From: michael_warnock@vanguard.com
Date: Thu Sep 28 2006 - 11:49:17 EDT
We have migrated to Sun's Qlogic from Emulex.
Sol 8 - 64bit
kernel 117350-23
Qlogic Sun HBAs/Mpxio
EMC Symmetrix
VXVM 4.1
============
After our SAN guys put new devices on the wire, we have had issues (
sometimes ) pulling those devices in.
The problem seems to be that I DO NOT see the controllers under cfgadm.
Therefore, I can not use
cfgadm -c configure cx ( which has been the normal procedure )
/dev/rdsk/c1t60060480000190100734533030313044d0s2
/devices/scsi_vhci/ssd@g60060480000190100734533030313044:c,raw
Controller /devices/ssm@0,0/pci@1b,600000/SUNW,qlc@1/fp@0,0
Device Address 50060482d52d3f9c,40
Host controller port WWN 210000e08b890337
Class primary
State ONLINE
Controller /devices/ssm@0,0/pci@1d,600000/SUNW,qlc@1/fp@0,0
Device Address 50060482d52d3f99,40
Host controller port WWN 210000e08b89cb37
Class primary
State ONLINE
--------
pssva024:root-(/dev/cfg) ls -l
total 36
lrwxrwxrwx 1 root root 60 Sep 7 13:26 c0 ->
../../devices/ssm@0,0/pci@18,700000/pci@1/SUNW,isptwo@4:scsi
lrwxrwxrwx 1 root root 56 Sep 24 02:03 c10 ->
../../devices/ssm@0,0/pci@1d,600000/SUNW,qlc@1/fp@0,0:fc <-- This
is my QLogic card c10
lrwxrwxrwx 1 root other 60 Sep 10 05:06 c2 ->
../../devices/ssm@0,0/pci@1a,700000/pci@1/SUNW,isptwo@4:scsi
lrwxrwxrwx 1 root other 47 Sep 10 05:06 c3 ->
../../devices/ssm@0,0/pci@19,700000/scsi@2:scsi
lrwxrwxrwx 1 root other 49 Sep 10 05:06 c4 ->
../../devices/ssm@0,0/pci@19,700000/scsi@2,1:scsi
lrwxrwxrwx 1 root other 47 Sep 10 05:06 c5 ->
../../devices/ssm@0,0/pci@1b,700000/scsi@2:scsi
lrwxrwxrwx 1 root other 49 Sep 10 05:06 c6 ->
../../devices/ssm@0,0/pci@1b,700000/scsi@2,1:scsi
lrwxrwxrwx 1 root root 56 Sep 24 02:03 c9 ->
../../devices/ssm@0,0/pci@1b,600000/SUNW,qlc@1/fp@0,0:fc <-- This
is my QLoigc card c9
-----
# cfgadm -al
c0 scsi-bus connected configured
unknown
c0::dsk/c0t0d0 disk connected configured
unknown
c0::dsk/c0t1d0 disk connected configured
unknown
c0::dsk/c0t6d0 CD-ROM connected configured
unknown
c0::es/ses0 processor connected configured
unknown
c0::es/ses1 processor connected configured
unknown
c0::rmt/0 tape connected configured
unknown
c2 scsi-bus connected configured
unknown
c2::dsk/c2t0d0 disk connected configured
unknown
c2::dsk/c2t1d0 disk connected configured
unknown
c2::dsk/c2t2d0 disk connected configured
unknown
c3 scsi-bus connected unconfigured
unknown
c4 scsi-bus connected unconfigured
unknown
c5 scsi-bus connected unconfigured
unknown
c6 scsi-bus connected unconfigured
unknown
=============
Any ideas?
1) Why I don't see the controllers under cfgadm
2) Is there a way to pull these devices in.
Thank you
Michael Warnock
UTS/x38031
----------------------------------------------------------------------
CONFIDENTIALITY STATEMENT. The information contained in this e-mail message, including attachments, is the confidential information of, and/or is the property of, Vanguard. The information is intended for use solely by the individual or entity named in the message. If you are not an intended recipient or you received this in error, then any review, printing, copying, or distribution of any such information is prohibited, and please notify the sender immediately by reply e-mail and then delete this e-mail from your system.
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:40:53 EDT