From: Jorge Carrizo (jorge_carrizo@yahoo.com)
Date: Thu Sep 28 2006 - 06:02:42 EDT
hi all
well after a long nigth, I know I need help. Here is my setup
SunOS host 5.9 Generic_117171-15 sun4u sparc SUNW,Sun-Fire-480R
2 x T3+ (T3B Release 3.2.3 Wed Dec 14 12:04:38 PST 2005 )
plus 2 x StorEdge SanBox-8
Two volumes on the T3+ "sliced" with volslice, luns defined on top of that.
volslice list
volslice create s0v0 -z 11GB v0
volslice create s1v0 -z 11GB v0
volslice create s2v0 -z 11GB v0
volslice create s3v0 -z 11GB v0
volslice create s4v0 -z 11GB v0
volslice create s5v0 -z 11GB v0
volslice create s6v0 -z 11GB v0
volslice create s0v1 -z 11GB v1
volslice create s1v1 -z 11GB v1
volslice create s2v1 -z 11GB v1
volslice create s3v1 -z 11GB v1
volslice create s4v1 -z 11GB v1
volslice create s5v1 -z 11GB v1
volslice create s6v1 -z 11GB v1
volslice list
Mapped to both HBA. WWN was obtained from
# luxadm -e port
Found path to 3 HBA ports
/devices/pci@8,600000/SUNW,qlc@1/fp@0,0:devctl CONNECTED
/devices/pci@8,600000/SUNW,qlc@2/fp@0,0:devctl NOT CONNECTED
/devices/pci@9,600000/SUNW,qlc@2/fp@0,0:devctl CONNECTED
# luxadm -e dump_map /devices/pci@8,600000/SUNW,qlc@1/fp@0,0:devctl
Pos Port_ID Hard_Addr Port WWN Node WWN Type
0 1001c9 0 50020f230000f67d 50020f200000f67d 0x1f (Unknown Type)
1 1005ef 0 210100e08b3401c4 200100e08b3401c4 0x1f (Unknown Type)
2 100001 0 210000e08b09ef21 200000e08b09ef21 0x1f (Unknown Type,Host Bus Adapter)
the WWN of the T3 is visible there
but not here
bash-2.05# luxadm -e dump_map /devices/pci@9,600000/SUNW,qlc@2/fp@0,0:devctl
Pos AL_PA ID Hard_Addr Port WWN Node WWN Type
0 e8 1 e8 21000004cfe4ec86 20000004cfe4ec86 0x0 (Disk device)
1 ef 0 ef 21000004cfe4e032 20000004cfe4e032 0x0 (Disk device)
2 1 7d 0 210000e08b000000 200000e08b000000 0x1f (Unknown Type,Host Bus Adapter)
more work on the T3 for the "lun mapping "
lun wwn list
lun perm lun 0 rw wwn 210000e08b09ef21
lun perm lun 1 rw wwn 210000e08b09ef21
lun perm lun 2 rw wwn 210000e08b09ef21
lun perm lun 3 rw wwn 210000e08b09ef21
lun perm lun 4 rw wwn 210000e08b09ef21
lun perm lun 5 rw wwn 210000e08b09ef21
lun perm lun 6 rw wwn 210000e08b09ef21
lun perm lun 7 rw wwn 210000e08b000000
lun perm lun 8 rw wwn 210000e08b000000
lun perm lun 9 rw wwn 210000e08b000000
lun perm lun 10 rw wwn 210000e08b000000
lun perm lun 11 rw wwn 210000e08b000000
lun perm lun 12 rw wwn 210000e08b000000
lun perm lun 13 rw wwn 210000e08b000000
lun wwn list
and the "zoning" was finished ... but still cannot see the disk with the "format" command.
Double checking the job I had found that SunSurfer pretends un upgrade (flash) of the switch.
Other than that, any ideas of why I cannot make the disk available to the server ?
tks so much
jorge
# lun wwn list
# lun perm lun 0 rw wwn <host HBA>
etc.
---------------------------------
Pregunta. Respondi. Descubrm.
Todo lo que quermas saber, y lo que ni imaginabas,
esta en Yahoo! Respuestas (Beta).
Probalo ya!
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:40:53 EDT