From: Ian Topham (Ian.Topham@Digica.com)
Date: Tue Sep 26 2006 - 07:34:55 EDT
Hi gurus
I have added 2 disks to a 3510 StorEdge and increased the size of
the logical drive in the RAID5 array.
The sccli 'show partitions' command now sees 2 partitions, the first is
the size of the original array, the second is the additional space
created by the addition of the 2 disks.
What I need to do is to create 1 partition with all the disk space in
it.
Does anyone have an idea of what to do to accomplish this?
Thanks - Ian
This email is confidential and may be privileged. If you are not the intended
recipient please notify the sender immediately and delete the email from your
computer.
You should not copy the email, use it for any purpose or disclose its contents
to any other person.
Please note that any views or opinions presented in this email may be personal
to the author and do not necessarily represent the views or opinions of
Digica.
It is the responsibility of the recipient to check this email for the presence
of viruses. Digica accepts no liability for any damage caused by any virus
transmitted by this email.
UK: Phoenix House, Colliers Way, Nottingham, NG8 6AT UK
Reception Tel: + 44 (0) 115 977 1177
Support Centre: 0845 607 7070
Fax: + 44 (0) 115 977 7000
http://www.digica.com
SOUTH AFRICA: Building 3, Parc du Cap, Mispel Road, Bellville, 7535, South
Africa
Tel: + 27 (0) 21 957 4900
Fax: + 27 (0) 21 948 3135
http://www.digica.com
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:40:51 EDT