From: bob metcalf (bobmetcalf@yahoo.com)
Date: Thu Sep 14 2006 - 15:22:36 EDT
Am trying to create a clone disk with
lucreate and am getting an error message/failure
on the swap directive. (Without the swap directive
it works fine.
Syntax and error message below--any ideas appreciated.
I've combed sunsolve and google with no luck.
====
# lucreate -m /:d101:ufs -m /var:d301:ufs -m
/usr3:d410:ufs -m -:d201:swap -n ABEsol10
Discovering physical storage devices
Discovering logical storage devices
Cross referencing storage devices with boot
environment configurations
Determining types of file systems supported
Validating file system requests
The device name <d101> expands to device path
</dev/md/dsk/d101>
The device name <d301> expands to device path
</dev/md/dsk/d301>
The device name <d410> expands to device path
</dev/md/dsk/d410>
The device name <d201> expands to device path
</dev/md/dsk/d201>
ERROR: file system configuration
<-:/dev/md/dsk/d201:swap> is not valid
ERROR: there is <1> conflict between devices and
options
ERROR: cannot create new boot environment using file
systems as configured
ERROR: please review all file system configuration
options
ERROR: cannot create new boot environment using
options provided
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:40:48 EDT