From: Joe A (spaceyjoe2020@yahoo.com)
Date: Thu Sep 14 2006 - 10:50:31 EDT
Hi All,
I've been working on getting L8 autoloader up and running with Sun Storedge Backup Software 7.2.
I've installed all the pkgs.
{10} ok probe-scsi-all
This command may hang the system if a Stop-A or halt command
has been executed. Please type reset-all to reset the system
before executing this command.
Do you wish to continue? (y/n) y
/pci@9,600000/SUNW,qlc@2
/pci@8,600000/scsi@1,1
/pci@8,600000/scsi@1
Target 0
Unit 0 Removable Device type 8 ADIC FastStor 2 G12r
Target 5
Unit 0 Removable Tape HP Ultrium 2-SCSI F67A
Monday backup gets done as planned but when I check Tuesdays backup I see that it doesnt mount the volume with Tuesday pool. When I check for drivers I see it is in the but when I do probe-scsi-all I dont see the details mentioned above. I've reinstalled and again it works for 1 day and stops the next.
I am using dual port card: PCI/PCI-X Dual Ultra320 SCSI Host Adapter SGXPCI1SCSILM320 on a SunFire V490 Solaris10 64bit.
Thanks in Advance
Joe
---------------------------------
Talk is cheap. Use Yahoo! Messenger to make PC-to-Phone calls. Great rates starting at 1"/min.
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:40:48 EDT