How to configure powerpath for EMC on solaris 10.

From: venkat raju (venkat.raju@yahoo.com)
Date: Mon Sep 11 2006 - 01:06:07 EDT

Next message: Harald.Husemann@materna.de: "SUMMARY: IN.mpathd messages guide?"
Previous message: John DiMarco: "IMPORTANT: Read this before posting to Sun-Managers"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi Managers,

  I know how to configure / enable EMC powerpath in solaris 8 / 9. using
  /etc/powercf -q; /etc/powermt load; /etc/powermt config; init q; /etc/powermt display.

  But in solaris 10 bydefault while reboot -- -r will take of this...?

  Pls. confirm me is there any way to proceed.

  Thanks,
  Venky

---------------------------------
Talk is cheap. Use Yahoo! Messenger to make PC-to-Phone calls. Great rates starting at 1"/min.
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers

Next message: Harald.Husemann@materna.de: "SUMMARY: IN.mpathd messages guide?"
Previous message: John DiMarco: "IMPORTANT: Read this before posting to Sun-Managers"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:40:46 EDT