From: M K Mathur (mkmathur@gmail.com)
Date: Fri Sep 08 2006 - 09:29:16 EDT
Dear Gurus,
We have SUN Blade 2500 systems with Solaris 8. We want to configure SGI
TP9300 SAN box using FCX2-6562-L hba. When we do probe-scsi-all at the PROM
level (ok prompt), all the luns of TP9300 are properly displayed. However,
on booting in solaris 8, these luns are not available even after devfsadm /
reboot -r. we already have SUNWjfca package installed and configured on the
system.
Please Help.
regards,
MK Mathur
*********************************************************
Manager (Prog.)
Room # 419, INTEG, GEOPIC, KDMIPE Campus
Oil and Natural Gas Corporation Limited
Kaulagarh Road, DEHRADUN - 248195
UTTERANCHAL
Tel: +91-135-2795781
Fax: +91-135-2750286
Email: mkmathur@gmail.com
*********************************************************
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:40:45 EDT