From: David Stapleton (stapleton.d@gmail.com)
Date: Tue Sep 05 2006 - 04:02:43 EDT
A slight update : Some folks have already responded with a suggestion
that it is a full disk - thanks for the quick response but this is not
the case, all target file systems have plenty of space.
---------- Forwarded message ----------
From: David Stapleton <stapleton.d@gmail.com>
Date: Sep 5, 2006 9:49 AM
Subject: Jumpstarting with FlashArchive err. Could not stop the extraction
To: sunmanagers <sunmanagers@sunmanagers.org>
Hi folks,
A very quick question. We are attempting to jumpstart a 240 with a
flash image from a 6800 and it bombs with the following errors:
* Could not stop the extraction
It then says 100% extracted before exiting with
* Could not extract flashArchive
The sun managers site seems to be down at the moment so I cannot
search it and I know it is most likely, if not certainly, a problem
caused by the difference in hardware but is there a way around it?
Any comments/suggestions are most welcome and I will summarise if I
get responses.
Thanks and regards,
David
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:40:43 EDT