From: Stefaan Margot (stefaan.margot@pandora.be)
Date: Thu Jul 11 2002 - 04:53:08 EDT
Hi SUN managers,
I have a question about a prtdiag -v output.
Below you can see the output I am talking about.
If you look at the IO cards part, you can see that it reports on slot 1,2 and 3 multiple devices. (the 3 slots appear 3 times in the list)
How is this possible, or what does it mean?
Hope someone can give me the answer
TIA
Stefaan.
=============================================================================
System Configuration: Sun Microsystems sun4u Sun Ultra 5/10 UPA/PCI (UltraSPARC-IIi 440MHz)
System clock frequency: 110 MHz
Memory size: 256 Megabytes
========================= CPUs =========================
Run Ecache CPU CPU
Brd CPU Module MHz MB Impl. Mask
--- --- ------- ----- ------ ------ ----
0 0 0 440 2.0 12 9.1
========================= IO Cards =========================
Bus# Freq
Brd Type MHz Slot Name Model
--- ---- ---- ---- -------------------------------- ----------------------
0 PCI-1 33 1 ebus
0 PCI-1 33 1 network-SUNW,hme
0 PCI-1 33 2 SUNW,m64B ATY,GT-C
0 PCI-1 33 3 ide-pci1095,646
0 PCI-2 33 2 pci108e,5043-pci108e,5043
0 PCI-2 33 3 pci-pci1011,24
No failures found in System
===========================
========================= HW Revisions =========================
ASIC Revisions:
---------------
Cheerio: ebus Rev 1
FEPS: SUNW,hme Rev c1
System PROM revisions:
----------------------
OBP 3.25.3 2000/06/29 14:12 POST 3.1.0 2000/06/27 13:56
=============================================================================
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:24:35 EDT