Booting a v240 from cdrom

From: Andreas Höschler (ahoesch@smartsoft.de)
Date: Tue Aug 22 2006 - 11:59:01 EDT

• Next message: Scott Mickey: "Summary: Sun Blade 100 - strange behavior after firmware update."
• Previous message: Steven Sim: "Obtaining Error Return Status when using rsh remote command execution"
• Next in thread: Andreas Höschler: "Summary: Booting a v240 from cdrom"
• Reply: Andreas Höschler: "Summary: Booting a v240 from cdrom"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hello all,

I just unpacked a brand new SunFire 240, inserted a DVD-ROM drive and
tried to boot from a self-burned DVD (worked on a Netra).

{1} ok boot cdrom
Probing system devices
Probing memory
Probing I/O buses

Sun Fire V240, No Keyboard
Copyright 2005 Sun Microsystems, Inc. All rights reserved.
OpenBoot 4.18.5, 2048 MB memory installed, Serial #51024249.
Ethernet address 0:3:ba:a:91:79, Host ID: 830a9179.

Rebooting with command: boot cdrom
Boot device: /pci@1e,600000/ide@d/cdrom@0,0:f File and args:

The machine is hanging here and does nothing anymore. Any ideas?

Thanks a lot!

Regards,

  Andreas
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers

• Next message: Scott Mickey: "Summary: Sun Blade 100 - strange behavior after firmware update."
• Previous message: Steven Sim: "Obtaining Error Return Status when using rsh remote command execution"
• Next in thread: Andreas Höschler: "Summary: Booting a v240 from cdrom"
• Reply: Andreas Höschler: "Summary: Booting a v240 from cdrom"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:40:38 EDT