From: sudesh.shetty@wipro.com
Date: Fri Aug 18 2006 - 10:29:50 EDT
Hi Gurus,
I have created a RAID 5 group using 11 disks, each of 72GB
Capacity after which i had created a number of volumes on it which were
successful. Now when i try to create a Volume of 70GB size, it gives me an "
Not enough Allocated block space".. even though there is around 150GB of free
space. When i try to create a smaller size Volume(less than 70GB) say of 60gb
it gets created successfully.
Are there any limitations on the number of volumes that can be created or the
size..
The disks are installed in an External SUN D2 Storage and Version of VxVM is
3.2..
Any help will be highly appreciated....
Regards
SUDESH
The information contained in this electronic message and any attachments to
this message are intended for the exclusive use of the addressee(s) and may
contain proprietary, confidential or privileged information. If you are not
the intended recipient, you should not disseminate, distribute or copy this
e-mail. Please notify the sender immediately and destroy all copies of this
message and any attachments.
WARNING: Computer viruses can be transmitted via email. The recipient should
check this email and any attachments for the presence of viruses. The company
accepts no liability for any damage caused by any virus transmitted by this
email.
www.wipro.com
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:40:38 EDT