: E250 not even getting to ok prompt.

From: Roe, Patrick (patrick.roe@thus.net)
Date: Thu Aug 10 2006 - 11:08:52 EDT


Thanks to all who replied, especially Ryan who came up with plugging a
sun keyboard in and holding down stop-n to reset the NVRAM.
I'd imagine you've saved sun some money and me lots of hasstle since
they were sending me out a new system board!!

I've not got to the bottom of my initial problem but hope that wont be
far away now.

Thanks
Patrick

-----Original Message-----
From: sunmanagers-bounces@sunmanagers.org
[mailto:sunmanagers-bounces@sunmanagers.org] On Behalf Of Roe, Patrick
Sent: 10 August 2006 11:29
To: sunmanagers@sunmanagers.org
Subject: E250 not even getting to ok prompt.

Hi Sunmanagers,
I have a major problem with an E250.
With no recent changes to the server it stopped any type of logon but
remained
pingable.

The rsc card was only ever used for the purpose of serial access. As it
turns
out the sc username password was not correct, I know great.

I could not get any output from ttya/b or keyboard/monitor.

I disabled the rsc card and was able to get some post from ttya. Below
is how
far it got but it did not repond to any type of break I send to it! I
have
spoken to Sun who's solution it seems is to start swapping out parts
starting
with system board. I can feel that one dragging out.

Any ideas?

Thanks
Patrick

CPU0 has assumed the role of Boot CPU

@(#) Sun (TM) Enterprise 250 3.30 Version 0 created 2003/11/11 10:37
Online: CPU0 Ultra-II (v10.0) 4:1 2048KB 2-2 ECache MCap 7
Offline: CPU1 (MD'e
Set-Speed Reset

CPU0 has assumed the role of Boot CPU

@(#) Sun (TM) Enterprise 250 3.30 Version 0 created 2003/11/11 10:37
Online: CPU0 Ultra-II (v10.0) 4:1 2048KB 2-2 ECache MCap 7
Offline: CPU1 (MD'ed)
Probing keyboard for L1/L1-D...Done
Executing Power On SelfTest w/%o0 = 0000.0000.0010.1002

0>
0>@(#) Sun UltraSPARC-II 2-way UPA/PCI POST 6.1.0 11/11/03: 10:49
0>INFO: Processor 0 is master CPU.
0> <00> Init System BSS
0> <00> NVRAM Battery Detect Test
0> <00> NVRAM Scratch Addr Test
0> <00> DMMU TLB Tag Access Test
0> <00> DMMU TLB RAM Access Test
0> <00> Probe Ecache
0>INFO: 2048KB Ecache
0> <00> Ecache RAM Addr Test
0> <00> Ecache Tag Addr Test
0> <00> Invalidate Ecache Tags
0> <00> SC Dtag Probe
0>INFO: Dtag supports up to 2MB Ecache
0>INFO: Processor 1 is missing or disabled.
0> <00> Init SC Regs
0> <00> SC Address Reg Test
0> <00> SC Reg Index Test
0> <00> SC Regs Test
0> <00> SC Dtag RAM Addr Test
0> <00> SC Dtag Init
0> <00> Init SC Regs
0> <00> SC Cache Size Init
0> <00> Synch up Processor Ecache Sizes
0> <00> Probe Memory
0>INFO: 256MB Bank 0
0>INFO: 512MB Bank 1
0>INFO: 512MB Bank 2
0>INFO: No memory detected in Bank 3
0> <00> Test Memory Data Lines
0> <00> Test Memory Address Lines
0> <00> Malloc Post Memory
0> <00> Init Post Memory
0> <00> Map PROM/STACK/NVRAM in DMMU
0> <00> Memory Stack Test
0> <00> Init Memory
0> <00> ECC Memory Addr Test
0> <00> V9 Instruction Test
0> <00> Memory Addr w/ Ecache Test
0> <00> Block Memory Addr Test
0> <00> Copy Post to Memory
0> <00> Map/Exec POST from Memory
0> <00> Map alternate CPUs
0> <00> Init Memory
0>INFO: 256MB Bank 0
0>INFO: 512MB Bank 1
0>INFO: 512MB Bank 2
0>INFO: No memory in Bank 3
0> <00> OBP Memory Test
0> <1f> Init Psycho
0> <1f> Psycho Cntl and UPA Reg Test
0> <1f> Psycho DMA Scoreboard Reg Test
0> <1f> Psycho Perf Cntl Reg Test
0> <1f> PIO Decoder and BCT Test
0> <1f> PCI Byte Enable Test
0> <1f> Counter/Timer Limit Regs Test
0> <1f> Timer Increment Test
0> <1f> Timer Reload Test
0> <1f> Timer Periodic Test
0> <1f> Mondo Int Map (short) Reg Test
0> <1f> Mondo Int Set/Clr Reg Test
0> <1f> Psycho IOMMU Regs Test
0> <1f> Psycho IOMMU RAM NTA Test
0> <1f> Psycho IOMMU CAM NTA Test
0> <1f> Psycho IOMMU RAM Address Test
0> <1f> Psycho IOMMU CAM Address Test
0> <1f> IOMMU TLB Compare Test
0> <1f> IOMMU TLB Flush Test
0> <1f> Stream Buff A Control Reg Test
0> <1f> Psycho ScacheA Page Tag Addr Test
0> <1f> Psycho ScacheA Line Tag Addr Test
0> <1f> Psycho ScacheA RAM Addr Test
0> <1f> Psycho ScacheA Page Tag NTA Test
0> <1f> Psycho ScacheA Line Tag NTA Test
0> <1f> Psycho ScacheA Err Status NTA Test
0> <1f> Psycho ScacheA RAM NTA Test
0> <1f> Stream Buff B Control Reg Test
0> <1f> Psycho ScacheB Page Tag Addr Test
0> <1f> Psycho ScacheB Line Tag Addr Test
0> <1f> Psycho ScacheB RAM Addr Test
0> <1f> Psycho ScacheB Page Tag NTA Test
0> <1f> Psycho ScacheB Line Tag NTA Test
0> <1f> Psycho ScacheB Err Status NTA Test
0> <1f> Psycho ScacheB RAM NTA Test
0> <1f> PBMA PCI Config Space Regs Test
0> <1f> PBMA Control/Status Reg Test
0> <1f> PBMA Diag Reg Test
0> <1f> PBMB PCI Config Space Regs Test
0> <1f> PBMB Control/Status Reg Test
0> <1f> PBMB Diag Reg Test
0> <1f> Consist DMA Rd, IOMMU miss Lpbk Test
0>STATUS=PASSED

Power On Selftest Completed
    Status = 0000.0000.0000.0000 ffff.ffff.f00b.2ee8
ffdf.ffff.0bd1.1111
POST Reset

CPU0 has assumed the role of Boot CPU

@(#) Sun (TM) Enterprise 250 3.30 Version 0 created 2003/11/11 10:37
Online: CPU0 Ultra-II (v10.0) 4:1 2048KB 2-2 ECache MCap 7
Offline: CPU1 (MD'ed)
Setting system ECache size to 2048KB
Clearing DTAGS...Done
Programming memory controller for 10ns/100MHz UPA timing
Clearing E-Cache Tags...Done
Clearing I/D TLBs...Done
Probing Memory...Done
HiMem base = 0000.0000.4000.0000 size = 0000.0000.2000.0000
Clearing Memory...including Unix Retained Memory...Done
MMUs ON
Copying ROM to RAM...Done
RAM CRC = 0000.0000.e5e9.49a2; ROM CRC = 0000.0000.e5e9.49a2
Decompressing into Memory...0000.0000.0004.5304 (277KB)...Done
Size = 0000.0000.0008.5cc0 (536KB)
Starting Forth kernel at 0000.0000.f005.9e1c
ttya initialized
SC Control: EWP:0 IAP:0 FATAL:0 WAKEUP:0 BXIR:0 BPOR:0 SXIR:0 SPOR:1
POR:0
System Memory Configuration:
  Bank #0 64 64 64 64 : 256 MB [Available 256MB @ 0 ]
  Bank #1 128 128 128 128 : 512 MB [Available 512MB @ 20000000 ]
  Bank #2 128 128 128 128 : 512 MB [Available 512MB @ 40000000 ]
  Bank #3 0 0 0 0 : 0 MB [Not In Use]
Environmental monitor: enabled
Probing Floppy: No drives detected
Initializing RSC...Done.
Primary UPA probing
Probing all UPA slots ................................Done.
At UPA Slot 0 Created Node(s)...SUNW,UltraSPARC-II
At UPA Slot 1f Created Node(s)...pci pci

Primary I/O probing
Probing /pci@1f,4000 at Device 1 network
Probing /pci@1f,4000 at Device 3 scsi disk tape scsi disk tape
Probing /pci@1f,4000 at Device 2 Nothing there
Probing /pci@1f,4000 at Device 4 Nothing there
Probing /pci@1f,4000 at Device 5 pci
Probing /pci@1f,4000/pci@5 at Device 0 network
Probing /pci@1f,4000/pci@5 at Device 1 Nothing there
Probing /pci@1f,4000/pci@5 at Device 2 Nothing there
Probing /pci@1f,4000/pci@5 at Device 3 Nothing there
Probing /pci@1f,4000/pci@5 at Device 4 Nothing there
Probing /pci@1f,4000/pci@5 at Device 5 Nothing there
Probing /pci@1f,4000/pci@5 at Device 6 Nothing there
Probing /pci@1f,4000/pci@5 at Device 7 Nothing there
Probing /pci@1f,4000/pci@5 at Device 8 Nothing there
Probing /pci@1f,4000/pci@5 at Device 9 Nothing there
Probing /pci@1f,4000/pci@5 at Device a Nothing there
Probing /pci@1f,4000/pci@5 at Device b Nothing there
Probing /pci@1f,4000/pci@5 at Device c Nothing there
Probing /pci@1f,4000/pci@5 at Device d Nothing there
Probing /pci@1f,4000/pci@5 at Device e Nothing there
Probing /pci@1f,4000/pci@5 at Device f Nothing there

Probing /pci@1f,2000 at Device 0 This slot excluded from probing...
Probing /pci@1f,2000 at Device 1 Nothing there
Probing /pci@1f,2000 at Device 2 Nothing there
Probing /pci@1f,2000 at Device 3 Nothing there
Probing /pci@1f,2000 at Device 4 Nothing there
Probing /pci@1f,2000 at Device 5 Nothing there

Diagnostics Reset

CPU0 has assumed the role of Boot CPU

@(#) Sun (TM) Enterprise 250 3.30 Version 0 created 2003/11/11 10:37
Online: CPU0 Ultra-II (v10.0) 4:1 2048KB 2-2 ECache MCap 7
Offline: CPU1 (MD'ed)
Setting system ECache size to 2048KB
Clearing DTAGS...Done
Programming memory controller for 10ns/100MHz UPA timing
Clearing E-Cache Tags...Done
Clearing I/D TLBs...Done
Probing Memory...Done
HiMem base = 0000.0000.4000.0000 size = 0000.0000.2000.0000
Clearing Memory...Done
MMUs ON
Copying ROM to RAM...Done
RAM CRC = 0000.0000.e5e9.49a2; ROM CRC = 0000.0000.e5e9.49a2
Decompressing into Memory...0000.0000.0004.5304 (277KB)...Done
Size = 0000.0000.0008.5cc0 (536KB)
Starting Forth kernel at 0000.0000.f005.9e1c
ttya initialized
SC Control: EWP:0 IAP:0 FATAL:0 WAKEUP:0 BXIR:0 BPOR:0 SXIR:0 SPOR:1
POR:0
System Memory Configuration:
  Bank #0 64 64 64 64 : 256 MB [Available 256MB @ 0 ]
  Bank #1 128 128 128 128 : 512 MB [Available 512MB @ 20000000 ]
  Bank #2 128 128 128 128 : 512 MB [Available 512MB @ 40000000 ]
  Bank #3 0 0 0 0 : 0 MB [Not In Use]
Environmental monitor: enabled
Probing Floppy: No drives detected
Initializing RSC...Done.
Primary UPA probing
Probing all UPA slots ................................Done.
At UPA Slot 0 Created Node(s)...SUNW,UltraSPARC-II
At UPA Slot 1f Created Node(s)...pci pci

Primary I/O probing
Probing /pci@1f,4000 at Device 1 network
Probing /pci@1f,4000 at Device 3 scsi disk tape scsi disk tape
Probing /pci@1f,4000 at Device 2 Nothing there
Probing /pci@1f,4000 at Device 4 Nothing there
Probing /pci@1f,4000 at Device 5 pci
Probing /pci@1f,4000/pci@5 at Device 0 network
Probing /pci@1f,4000/pci@5 at Device 1 Nothing there
Probing /pci@1f,4000/pci@5 at Device 2 Nothing there
Probing /pci@1f,4000/pci@5 at Device 3 Nothing there
Probing /pci@1f,4000/pci@5 at Device 4 Nothing there
Probing /pci@1f,4000/pci@5 at Device 5 Nothing there
Probing /pci@1f,4000/pci@5 at Device 6 Nothing there
Probing /pci@1f,4000/pci@5 at Device 7 Nothing there
Probing /pci@1f,4000/pci@5 at Device 8 Nothing there
Probing /pci@1f,4000/pci@5 at Device 9 Nothing there
Probing /pci@1f,4000/pci@5 at Device a Nothing there
Probing /pci@1f,4000/pci@5 at Device b Nothing there
Probing /pci@1f,4000/pci@5 at Device c Nothing there
Probing /pci@1f,4000/pci@5 at Device d Nothing there
Probing /pci@1f,4000/pci@5 at Device e Nothing there
Probing /pci@1f,4000/pci@5 at Device f Nothing there

Probing /pci@1f,2000 at Device 0 This slot excluded from probing...
Probing /pci@1f,2000 at Device 1 Nothing there
Probing /pci@1f,2000 at Device 2 Nothing there
Probing /pci@1f,2000 at Device 3 Nothing there
Probing /pci@1f,2000 at Device 4 Nothing there
Probing /pci@1f,2000 at Device 5 Nothing there

Hardware Power ON

CPU0 has assumed the role of Boot CPU

@(#) Sun (TM) Enterprise 250 3.30 Version 0 created 2003/11/11 10:37
Online: CPU0 Ultra-II (v10.0) 4:1 2048KB 2-2 ECache MCap 7
Offline: CPU1 (MD'e
Set-Speed Reset

CPU0 has assumed the role of Boot CPU

@(#) Sun (TM) Enterprise 250 3.30 Version 0 created 2003/11/11 10:37
Online: CPU0 Ultra-II (v10.0) 4:1 2048KB 2-2 ECache MCap 7
Offline: CPU1 (MD'ed)
Probing keyboard for L1/L1-D...Done
Executing Power On SelfTest w/%o0 = 0000.0000.0010.1002

0>
0>@(#) Sun UltraSPARC-II 2-way UPA/PCI POST 6.1.0 11/11/03: 10:49
0>INFO: Processor 0 is master CPU.
0> <00> Init System BSS
0> <00> NVRAM Battery Detect Test
0> <00> NVRAM Scratch Addr Test
0> <00> DMMU TLB Tag Access Test
0> <00> DMMU TLB RAM Access Test
0> <00> Probe Ecache
0>INFO: 2048KB Ecache
0> <00> Ecache RAM Addr Test
0> <00> Ecache Tag Addr Test
0> <00> Invalidate Ecache Tags
0> <00> SC Dtag Probe
0>INFO: Dtag supports up to 2MB Ecache
0>INFO: Processor 1 is missing or disabled.
0> <00> Init SC Regs
0> <00> SC Address Reg Test
0> <00> SC Reg Index Test
0> <00> SC Regs Test
0> <00> SC Dtag RAM Addr Test
0> <00> SC Dtag Init
0> <00> Init SC Regs
0> <00> SC Cache Size Init
0> <00> Synch up Processor Ecache Sizes
0> <00> Probe Memory
0>INFO: 256MB Bank 0
0>INFO: 512MB Bank 1
0>INFO: 512MB Bank 2
0>INFO: No memory detected in Bank 3
0> <00> Test Memory Data Lines
0> <00> Test Memory Address Lines
0> <00> Malloc Post Memory
0> <00> Init Post Memory
0> <00> Map PROM/STACK/NVRAM in DMMU
0> <00> Memory Stack Test
0> <00> Init Memory
0> <00> ECC Memory Addr Test
0> <00> V9 Instruction Test
0> <00> Memory Addr w/ Ecache Test
0> <00> Block Memory Addr Test
0> <00> Copy Post to Memory
0> <00> Map/Exec POST from Memory
0> <00> Map alternate CPUs
0> <00> Init Memory
0>INFO: 256MB Bank 0
0>INFO: 512MB Bank 1
0>INFO: 512MB Bank 2
0>INFO: No memory in Bank 3
0> <00> OBP Memory Test
0> <1f> Init Psycho
0> <1f> Psycho Cntl and UPA Reg Test
0> <1f> Psycho DMA Scoreboard Reg Test
0> <1f> Psycho Perf Cntl Reg Test
0> <1f> PIO Decoder and BCT Test
0> <1f> PCI Byte Enable Test
0> <1f> Counter/Timer Limit Regs Test
0> <1f> Timer Increment Test
0> <1f> Timer Reload Test
0> <1f> Timer Periodic Test
0> <1f> Mondo Int Map (short) Reg Test
0> <1f> Mondo Int Set/Clr Reg Test
0> <1f> Psycho IOMMU Regs Test
0> <1f> Psycho IOMMU RAM NTA Test
0> <1f> Psycho IOMMU CAM NTA Test
0> <1f> Psycho IOMMU RAM Address Test
0> <1f> Psycho IOMMU CAM Address Test
0> <1f> IOMMU TLB Compare Test
0> <1f> IOMMU TLB Flush Test
0> <1f> Stream Buff A Control Reg Test
0> <1f> Psycho ScacheA Page Tag Addr Test
0> <1f> Psycho ScacheA Line Tag Addr Test
0> <1f> Psycho ScacheA RAM Addr Test
0> <1f> Psycho ScacheA Page Tag NTA Test
0> <1f> Psycho ScacheA Line Tag NTA Test
0> <1f> Psycho ScacheA Err Status NTA Test
0> <1f> Psycho ScacheA RAM NTA Test
0> <1f> Stream Buff B Control Reg Test
0> <1f> Psycho ScacheB Page Tag Addr Test
0> <1f> Psycho ScacheB Line Tag Addr Test
0> <1f> Psycho ScacheB RAM Addr Test
0> <1f> Psycho ScacheB Page Tag NTA Test
0> <1f> Psycho ScacheB Line Tag NTA Test
0> <1f> Psycho ScacheB Err Status NTA Test
0> <1f> Psycho ScacheB RAM NTA Test
0> <1f> PBMA PCI Config Space Regs Test
0> <1f> PBMA Control/Status Reg Test
0> <1f> PBMA Diag Reg Test
0> <1f> PBMB PCI Config Space Regs Test
0> <1f> PBMB Control/Status Reg Test
0> <1f> PBMB Diag Reg Test
0> <1f> Consist DMA Rd, IOMMU miss Lpbk Test
0>STATUS=PASSED

Power On Selftest Completed
    Status = 0000.0000.0000.0000 ffff.ffff.f00b.2ee8
ffdf.ffff.0bd1.1111
POST Reset

CPU0 has assumed the role of Boot CPU

@(#) Sun (TM) Enterprise 250 3.30 Version 0 created 2003/11/11 10:37
Online: CPU0 Ultra-II (v10.0) 4:1 2048KB 2-2 ECache MCap 7
Offline: CPU1 (MD'ed)
Setting system ECache size to 2048KB
Clearing DTAGS...Done
Programming memory controller for 10ns/100MHz UPA timing
Clearing E-Cache Tags...Done
Clearing I/D TLBs...Done
Probing Memory...Done
HiMem base = 0000.0000.4000.0000 size = 0000.0000.2000.0000
Clearing Memory...including Unix Retained Memory...Done
MMUs ON
Copying ROM to RAM...Done
RAM CRC = 0000.0000.e5e9.49a2; ROM CRC = 0000.0000.e5e9.49a2
Decompressing into Memory...0000.0000.0004.5304 (277KB)...Done
Size = 0000.0000.0008.5cc0 (536KB)
Starting Forth kernel at 0000.0000.f005.9e1c
ttya initialized
SC Control: EWP:0 IAP:0 FATAL:0 WAKEUP:0 BXIR:0 BPOR:0 SXIR:0 SPOR:1
POR:0
System Memory Configuration:
  Bank #0 64 64 64 64 : 256 MB [Available 256MB @ 0 ]
  Bank #1 128 128 128 128 : 512 MB [Available 512MB @ 20000000 ]
  Bank #2 128 128 128 128 : 512 MB [Available 512MB @ 40000000 ]
  Bank #3 0 0 0 0 : 0 MB [Not In Use]
Environmental monitor: enabled
Probing Floppy: No drives detected
Initializing RSC...Done.
Primary UPA probing
Probing all UPA slots ................................Done.
At UPA Slot 0 Created Node(s)...SUNW,UltraSPARC-II
At UPA Slot 1f Created Node(s)...pci pci

Primary I/O probing
Probing /pci@1f,4000 at Device 1 network
Probing /pci@1f,4000 at Device 3 scsi disk tape scsi disk tape
Probing /pci@1f,4000 at Device 2 Nothing there
Probing /pci@1f,4000 at Device 4 Nothing there
Probing /pci@1f,4000 at Device 5 pci
Probing /pci@1f,4000/pci@5 at Device 0 network
Probing /pci@1f,4000/pci@5 at Device 1 Nothing there
Probing /pci@1f,4000/pci@5 at Device 2 Nothing there
Probing /pci@1f,4000/pci@5 at Device 3 Nothing there
Probing /pci@1f,4000/pci@5 at Device 4 Nothing there
Probing /pci@1f,4000/pci@5 at Device 5 Nothing there
Probing /pci@1f,4000/pci@5 at Device 6 Nothing there
Probing /pci@1f,4000/pci@5 at Device 7 Nothing there
Probing /pci@1f,4000/pci@5 at Device 8 Nothing there
Probing /pci@1f,4000/pci@5 at Device 9 Nothing there
Probing /pci@1f,4000/pci@5 at Device a Nothing there
Probing /pci@1f,4000/pci@5 at Device b Nothing there
Probing /pci@1f,4000/pci@5 at Device c Nothing there
Probing /pci@1f,4000/pci@5 at Device d Nothing there
Probing /pci@1f,4000/pci@5 at Device e Nothing there
Probing /pci@1f,4000/pci@5 at Device f Nothing there

Probing /pci@1f,2000 at Device 0 This slot excluded from probing...
Probing /pci@1f,2000 at Device 1 Nothing there
Probing /pci@1f,2000 at Device 2 Nothing there
Probing /pci@1f,2000 at Device 3 Nothing there
Probing /pci@1f,2000 at Device 4 Nothing there
Probing /pci@1f,2000 at Device 5 Nothing there

Diagnostics Reset

CPU0 has assumed the role of Boot CPU

@(#) Sun (TM) Enterprise 250 3.30 Version 0 created 2003/11/11 10:37
Online: CPU0 Ultra-II (v10.0) 4:1 2048KB 2-2 ECache MCap 7
Offline: CPU1 (MD'ed)
Setting system ECache size to 2048KB
Clearing DTAGS...Done
Programming memory controller for 10ns/100MHz UPA timing
Clearing E-Cache Tags...Done
Clearing I/D TLBs...Done
Probing Memory...Done
HiMem base = 0000.0000.4000.0000 size = 0000.0000.2000.0000
Clearing Memory...Done
MMUs ON
Copying ROM to RAM...Done
RAM CRC = 0000.0000.e5e9.49a2; ROM CRC = 0000.0000.e5e9.49a2
Decompressing into Memory...0000.0000.0004.5304 (277KB)...Done
Size = 0000.0000.0008.5cc0 (536KB)
Starting Forth kernel at 0000.0000.f005.9e1c
ttya initialized
SC Control: EWP:0 IAP:0 FATAL:0 WAKEUP:0 BXIR:0 BPOR:0 SXIR:0 SPOR:1
POR:0
System Memory Configuration:
  Bank #0 64 64 64 64 : 256 MB [Available 256MB @ 0 ]
  Bank #1 128 128 128 128 : 512 MB [Available 512MB @ 20000000 ]
  Bank #2 128 128 128 128 : 512 MB [Available 512MB @ 40000000 ]
  Bank #3 0 0 0 0 : 0 MB [Not In Use]
Environmental monitor: enabled
Probing Floppy: No drives detected
Initializing RSC...Done.
Primary UPA probing
Probing all UPA slots ................................Done.
At UPA Slot 0 Created Node(s)...SUNW,UltraSPARC-II
At UPA Slot 1f Created Node(s)...pci pci

Primary I/O probing
Probing /pci@1f,4000 at Device 1 network
Probing /pci@1f,4000 at Device 3 scsi disk tape scsi disk tape
Probing /pci@1f,4000 at Device 2 Nothing there
Probing /pci@1f,4000 at Device 4 Nothing there
Probing /pci@1f,4000 at Device 5 pci
Probing /pci@1f,4000/pci@5 at Device 0 network
Probing /pci@1f,4000/pci@5 at Device 1 Nothing there
Probing /pci@1f,4000/pci@5 at Device 2 Nothing there
Probing /pci@1f,4000/pci@5 at Device 3 Nothing there
Probing /pci@1f,4000/pci@5 at Device 4 Nothing there
Probing /pci@1f,4000/pci@5 at Device 5 Nothing there
Probing /pci@1f,4000/pci@5 at Device 6 Nothing there
Probing /pci@1f,4000/pci@5 at Device 7 Nothing there
Probing /pci@1f,4000/pci@5 at Device 8 Nothing there
Probing /pci@1f,4000/pci@5 at Device 9 Nothing there
Probing /pci@1f,4000/pci@5 at Device a Nothing there
Probing /pci@1f,4000/pci@5 at Device b Nothing there
Probing /pci@1f,4000/pci@5 at Device c Nothing there
Probing /pci@1f,4000/pci@5 at Device d Nothing there
Probing /pci@1f,4000/pci@5 at Device e Nothing there
Probing /pci@1f,4000/pci@5 at Device f Nothing there

Probing /pci@1f,2000 at Device 0 This slot excluded from probing...
Probing /pci@1f,2000 at Device 1 Nothing there
Probing /pci@1f,2000 at Device 2 Nothing there
Probing /pci@1f,2000 at Device 3 Nothing there
Probing /pci@1f,2000 at Device 4 Nothing there
Probing /pci@1f,2000 at Device 5 Nothing there
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers



This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:40:35 EDT