From: Julian Grunnell (julian.grunnell@pipex.net)
Date: Wed Aug 09 2006 - 07:40:06 EDT
Hi - hope someone can offer some help / advice with a JumpStart server /
client problem I have. The client server sits and hangs after the
"Configured interface hme0" stage has been reached.
Server:
1) Sun E220R with Solaris 9 s9_58shwpl3 SPARC installed
2) IP: 10.10.11.3
3) CD1/2 copied to /JumpStart using setup_install_server &
add_to_install_server scripts
4) /JumpStart made an NFS share
5) rpc / nfs.server / mountd / inetd (tftp) / rpc.bootparamd daemons all
running as required.
6) add an entry in /etc/hosts for the client server - "10.10.11.35
inbound2.first"
Ran following command on jumpstart server:
./add_install_client -e 8:0:20:b2:62:d6 inbound2.first sun4u
cat /etc/ethers
8:0:20:b2:62:d6 inbound2.first
cat /etc/bootparams
inbound2.first root=magnetic.first:/JumpStart/Solaris_9/Tools/Boot
install=magnetic.first:/JumpStart boottype=:in rootopts=:rsize=32768
As far as I can tell this is all that is required for a "minimal" jumpstart
server to work.
On the client from the ok prompt I ran the following command:
boot net -v install
And as mentioned after the "Configured interface" has been reached the
client just sits there. Below is all the verbose output from this. Any help
would be greatly appreciated.
{1} ok boot net -v install
Resetting ...
Can't open input device.
screen not found.
Can't open input device.
Keyboard not present. Using ttya for input and output.
Sun Enterprise 450 (2 X UltraSPARC-II 400MHz), No Keyboard
OpenBoot 3.14, 512 MB memory installed, Serial #11690710.
Ethernet address 8:0:20:b2:62:d6, Host ID: 80b262d6.
Rebooting with command: boot net -v install
Boot device: /pci@1f,4000/network@1,1 File and args: -v install
Timeout waiting for ARP/RARP packet
2aa00 Using RARP/BOOTPARAMS...
Internet address is: 10.10.11.35
hostname: inbound2.first
root server: magnetic.first (10.10.11.3)
root directory: /JumpStart/Solaris_9/Tools/Boot
Size: 0x5edcb+0x14c35+0x2530f Bytes
SunOS Release 5.9 Version Generic_118558-11 64-bit
Copyright 1983-2003 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
Ethernet address = 8:0:20:b2:62:d6
Using default device instance data
mem = 524288K (0x20000000)
avail mem = 502702080
root nexus = Sun Enterprise 450 (2 X UltraSPARC-II 400MHz)
pcipsy0 at root: UPA 0x1f 0x4000
pcipsy0 is /pci@1f,4000
pcipsy1 at root: UPA 0x1f 0x2000
pcipsy1 is /pci@1f,2000
pcipsy2 at root: UPA 0x4 0x4000
pcipsy2 is /pci@4,4000
pcipsy3 at root: UPA 0x4 0x2000
pcipsy3 is /pci@4,2000
pcipsy4 at root: UPA 0x6 0x4000
pcipsy4 is /pci@6,4000
pcipsy5 at root: UPA 0x6 0x2000
pcipsy5 is /pci@6,2000
SUNW,hme0 : PCI IO 2.0 (Rev Id = c1) Found
PCI-device: network@1,1, hme0
hme0 is /pci@1f,4000/network@1,1
Requesting Internet address for 8:0:20:b2:62:d6
SUNW,hme0 : Internal Transceiver Selected.
SUNW,hme0 : 100 Mbps Half-Duplex Link Up
Found my IP address: a0a0b23 (10.10.11.35)
hostname: inbound2.first
whoami: no domain name
root on magnetic.first:/JumpStart/Solaris_9/Tools/Boot fstype nfsdyn
PCI-device: ebus@1, ebus0
ebus0 is /pci@1f,4000/ebus@1
envctrl0 at ebus0: offset 14,600000
envctrl0 is /pci@1f,4000/ebus@1/SUNW,envctrl@14,600000
su0 at ebus0: offset 14,3083f8
su0 is /pci@1f,4000/ebus@1/su@14,3083f8
su1 at ebus0: offset 14,3062f8
su1 is /pci@1f,4000/ebus@1/su@14,3062f8
se0 at ebus0: offset 14,400000
se0 is /pci@1f,4000/ebus@1/se@14,400000
cpu1: UltraSPARC-II (portid 1 impl 0x11 ver 0xa0 clock 400 MHz)
cpu3: UltraSPARC-II (portid 3 impl 0x11 ver 0xa0 clock 400 MHz)
Configuring /dev and /devices
pseudo-device: devinfo0
devinfo0 is /pseudo/devinfo@0
/pci@1f,4000/scsi@3 (glm0):
Rev. 3 Symbios 53c875 found.
PCI-device: scsi@3, glm0
glm0 is /pci@1f,4000/scsi@3
PCI-device: scsi@3, glm0
glm0 is /pci@1f,4000/scsi@3
/pci@1f,4000/scsi@2 (glm1):
Rev. 3 Symbios 53c875 found.
PCI-device: scsi@2, glm1
glm1 is /pci@1f,4000/scsi@2
PCI-device: scsi@2, glm1
glm1 is /pci@1f,4000/scsi@2
/pci@6,4000/scsi@2 (glm2):
Rev. 5 Symbios 53c876 found.
PCI-device: scsi@2, glm2
glm2 is /pci@6,4000/scsi@2
PCI-device: scsi@2, glm2
glm2 is /pci@6,4000/scsi@2
/pci@6,4000/scsi@2,1 (glm3):
Rev. 5 Symbios 53c876 found.
PCI-device: scsi@2,1, glm3
glm3 is /pci@6,4000/scsi@2,1
PCI-device: scsi@2,1, glm3
glm3 is /pci@6,4000/scsi@2,1
sd0 at glm0: target 0 lun 0
sd0 is /pci@1f,4000/scsi@3/sd@0,0
fd0 at ebus0: offset 14,3023f0
fd0 is /pci@1f,4000/ebus@1/fdthree@14,3023f0
ecpp0 at ebus0: offset 14,3043bc
ecpp0 is /pci@1f,4000/ebus@1/ecpp@14,3043bc
pseudo-device: fssnap0
fssnap0 is /pseudo/fssnap@0
pseudo-device: ramdisk1024
ramdisk1024 is /pseudo/ramdisk@1024
pseudo-device: winlock0
winlock0 is /pseudo/winlock@0
pseudo-device: lockstat0
lockstat0 is /pseudo/lockstat@0
pseudo-device: llc10
llc10 is /pseudo/llc1@0
pseudo-device: lofi0
lofi0 is /pseudo/lofi@0
pseudo-device: fcp0
fcp0 is /pseudo/fcp@0
pseudo-device: trapstat0
trapstat0 is /pseudo/trapstat@0
Using RPC Bootparams for network configuration information.
Configured interface hme0
|
Thanks - Julian.
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:40:34 EDT