From: Bhavesh Shah (shah.bhavesh@gene.com)
Date: Tue Aug 08 2006 - 17:29:08 EDT
Hi Gurus,
I am trying jumpstart V240 with Solaris 10 and after successful
jumpstart when machine reboots it fails..
Here is the output:
SUNWtcpd.........................done. 3.03 Mbytes remaining.
SUNWtcsh.........................done. 2.64 Mbytes remaining.
SUNWter..........................done. 1.02 Mbytes remaining.
SUNWsolnm........................done. 1.00 Mbytes remaining.
Completed software installation
Solaris 10 software installation succeeded
Customizing system files
- Mount points table (/etc/vfstab)
- Unselected disk mount points
(/var/sadm/system/data/vfstab.unselected)
- Network host addresses (/etc/hosts)
- Network host addresses (/etc/hosts)
- Environment variables (/etc/default/init)
ERROR:
Rebooting with command: boot
Boot device: /pci@1c,600000/scsi@2/disk@2,0:a File and args:
SunOS Release 5.10 Version Generic_118822-25 64-bit
Copyright 1983-2005 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
Hardware watchdog enabled
Cannot be run outside smf(5)
INIT: Ignoring legacy "initdefault" entry.
INIT: Absent svc.startd entry or bad contract template. Not starting
svc.startd.
Requesting maintenance mode
(See /lib/svc/share/README for additional information.)
Root password for system maintenance (control-d to bypass):
Any help is greatly appreciated..
TIA
shahb
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:40:34 EDT