From: Ayaz Anjum (ayaz@mdsuae.ae)
Date: Tue Aug 08 2006 - 01:31:44 EDT
Hi Guys !
I have a SL500 with two FC drives connected to 4 solaris 10 servers though
brocade switches. At the moment there is no zoning on the brocade switches.
I am able to see the tape drives from all the solaris 10 boxes using the
cfgadm -al and luxadm commands.
On one of the server I modified to st.conf file to scan for 15 targets and
two luns on each target followed with a reconfiguration boot which got the
/dev/rmt links created for those two drives. However the same procedure is
not working with remaining four servers although I can see the tape drives
using luxadm and cfgadm commands on all the servers !!!!!
Any suggestions
Ayaz
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:40:33 EDT