From: Martin Meadows (PZXKYSP@atdva3.atd.gmeds.com)
Date: Mon Jul 08 2002 - 11:17:09 EDT
Thanks to the following folks for sending feedback:
From: Scott Howard <scott@doc.net.au>
From: David Foster <foster@dim.ucsd.edu>
From: Fiamingo, Frank <FiamingF@strsoh.org>
From: Casper Dik <Casper.Dik@Sun.COM>
From: Baranyai Pal <bp@hszk.bme.hu>
I did check the patch README file but was a little confused by it.
The original question is at the end of this file.
Martin Meadows
> >
> >Patch 106787-18 is for SNMP version 1.0.3 ONLY. Odds are you have
> >an older version installed. You'll need to download the new version
> >(it's on the SUn website somewhere), pkgrm the version you currently
> >have installed and then pkgadd the new version. Once you've done this
> >you should be able to apply the patch
> >
> >patchadd checks not only that you have the correct packages, but also
> >that you have the correct versions of those packages.
> >
--------------------------------------------------------------------------
Did you check the patch README?
According to it this patch requires package SUNWsasdk.
--------------------------------------------------------------------------
Make sure that "Solstice Enterprise Agents 1.0.3" is installed. The patch
failed for me also, and then I installed (re-installed?) v1.0.3. After that
the patch installed without a hitch.
--------------------------------------------------------------------------
You apparently need to download a newer version of the snmp agents
from some place and then patch it.
--------------------------------------------------------------------------
>From README:
Special Install Instructions:
-----------------------------
IMPORTANT: This patch is not compatible with SDK agents built prior to
patch 106956-03. These agents must be recompiled using mibcodegen from
patch 106956-03 or greater.
This patch is for SEA version 1.0.3
See SEA web page, if you need to add toolkit sdk (SUNWsasdk package)
http://www.sun.com/solstice/products/ent.agents
--------------------------------------------------------------------------
And here's the original question:
I never saw any answers to the following post and I never saw
a summary. I'm experiencing the same problem with patch
106787-18 for Solaris 2.6. Can anyone help?
Thanks!
Martin Meadows
>Date: Thu, 20 Jun 2002 19:15:09 -0400
>
>Hi,
>
>I've a Ultra 60 box running Solaris 2.6. This system
>is our HP Openview management platform. I've been
>trying to roll in the SNMP security patch recently
>released, 106787-18 for 2.6. The patch fails to
>install with the error code indicating missing packages
>for the patch. All required packages are in fact
>installed(SUNWmibii,SUNWsacom,SUNWsadmi,SUNWsasnm).
>I've tried the latest release of patchadd which came
>with one of the patches in the security and recommended
>patch set. Still no luck. We've shut the management
>station down until we can get this patched because
>this port is reachable from public IP space.
>
>Any advice welcome. Thanks, TW
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:24:34 EDT