From: Alex Stade (alex@trdlnk.com)
Date: Fri Aug 04 2006 - 20:08:31 EDT
Hi Managers,
I just bought a Garmin 18 GPS receiver and hooked it up to an RS232
port. I can tip with 4800 baud and see NMEA sentences. Yet for some
reason I am unable to figure out how to set up xntpd to use this device.
I liked /dev/cua/b to /dev/gps0 and configured the server to
127.127.20.0. I get the following error;
xntpd[1564]: [ID 266339 daemon.notice] using kernel phase-lock loop
0041, drift correction 0.00000
xntpd[1564]: [ID 678560 daemon.error] refclock_open: fd 5 TCIOFLUSH
failed: Invalid argument
xntpd[1564]: [ID 454976 daemon.error] configuration of 127.127.20.0 failed
xntpd[1564]: [ID 266339 daemon.notice] using kernel phase-lock loop
0041, drift correction -19810.04298
How come refclock_open doesn't succeed? Has anybody run in to this before?
Thanks!
-Alex
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:40:32 EDT