From: vlad f halilow (mlist@ratel.ru)
Date: Mon Jul 24 2006 - 04:05:28 EDT
hello everyone. in anyway to run SF480 with dirreferent clockspeed
processor? i have SF with 1200mhz processor module, and want to install
anothe head with 1050 module (both usIII). post returned an error in OBP
4.13.0:
0:0>Waiting for slave CPU=1:0 to start test, timeout in 44 seconds...
0:0>Waiting for slave CPU=1:0 to start test, timeout in 29 seconds...
0:0>Waiting for slave CPU=1:0 to start test, timeout in 14 seconds...
0:0>Waiting for slave CPU=1:0, timeout in 44 seconds...
0:0>Waiting for slave CPU=1:0, timeout in 29 seconds...
0:0>Waiting for slave CPU=1:0, timeout in 14 seconds...
0:0>
0:0>ERROR: TEST = Run POST from Memory
0:0>H/W under test = CPU0, All CPU0 Memory
0:0>Repair Instructions: Replace items in order listed by 'H/W under
test' above.
0:0>MSG = ERROR: Slave timeout waiting for 1:0 to finish, offlining cpu!
0:0>END_ERROR
0:0>INFO: Reset Module with CPUs 1 3, both have been offlined.
i have try to install 1050 module in slot A, but no difference. first
processor check ok (now 1050mhz), second fail with same error. is any
solution for this thing?
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:40:27 EDT