From: Jeff Wellens (jeffw@pbs.com)
Date: Wed Jul 10 2002 - 10:31:58 EDT
I have a SunFire 280 with 2 internal and 4 external drives. I successfully
added replicas to the internal drive but want to add metadb replicas to the
external drives, but it isn't working. Here is the metadb output I get when
I try this:
pbs@petoskey # metadb
flags first blk block count
a m p luo 16 1034 /dev/dsk/c3t0d0s3
a p luo 1050 1034 /dev/dsk/c3t0d0s3
a p luo 2084 1034 /dev/dsk/c3t0d0s3
a p luo 3118 1034 /dev/dsk/c3t0d0s3
M p unknown unknown /dev/dsk/c1t1d0s3
----------------------------------------------------------------------
Here is my partition setup for c1t1d0s3:
partition> p
Current partition table (original):
Total disk cylinders available: 24620 + 2 (reserved cylinders)
Part Tag Flag Cylinders Size Blocks
0 unassigned wm 0 0 (0/0/0) 0
1 unassigned wu 0 0 (0/0/0) 0
2 backup wu 0 - 24619 33.92GB (24620/0/0) 71127180
3 unassigned wm 0 - 1 2.82MB (2/0/0) 5778
4 unassigned wm 0 0 (0/0/0) 0
5 unassigned wm 0 0 (0/0/0) 0
6 usr wm 2 - 24439 33.67GB (24438/0/0) 70601382
7 unassigned wm 0 0 (0/0/0) 0
---------------------------------
Any ideas why this is not working?
Thanks!
Jeff Wellens
Publishing Business Systems
Technical Support Analyst
jeffw@pbs.com
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:24:34 EDT