From: wheakory@isu.edu
Date: Sun Jul 09 2006 - 20:07:35 EDT
Here's my question if possible. I have a disk (on a Sun v440) that has
a layout of
/ 8gb
/var 54gb
swap 4gb
Now I have 3 other disks that are not being used that are the same size
as the one being used.
I want to concatenate 1 disk with the same existing partitions so thatit
would double the space which I can use "prtvtoc" to accomplish the same
disk layout. The new file systems would then be doubled as below:
/ 16 gb
/var 108 gb
swap 8gb
Then I want to concatenate the other two disks with the identical layout
has the active disks and use these as a mirror to the active disks. Can
this be done? I hope I'm making sense. I didn't know if you can
concatenate root if its a mounted partition without going into single
user mode.
Here's what I did so far
# metadb -a -f -c3 c1t0d0s7 c1t1d0s7 c1t2d0s7 c1t3d0s7
# metainit -f d1 1 2 /dev/dsk/c1t0d0s0 /dev/dsk/c1t1d0s0
d1: Concat/Stripe is setup
# metainit -f d2 1 2 /dev/dsk/c1t2d0s0 /dev/dsk/c1t3d0s0
d2: Concat/Stripe is setup
# metainit d0 -m d1
d0: Mirror is setup
# metaroot d0
metaroot: Stripe d1 has more than 1 slice
What does it mean by "d1 has more than 1 slice"?
-- Kory Wheatley [demime 1.01b removed an attachment of type text/x-vcard which had a name of wheakory.vcf; charset=windows-1252] _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:40:21 EDT