From: Xavier Mertens (xavier@rootshell.be)
Date: Thu Jul 06 2006 - 05:39:09 EDT
Thanks to Peter, Joon for their quick reply!
It must be done from the global zone.
There are two methods:
1. Via zonecfg:
zonecfg -z zone1
add net
set physical=bge0
set address=1.1.1.2
end
verify
commit
2. Via ifconfig:
ifconfig bge0:2 plumb 1.1.1.2 netmask + broadcast + up
ifconfig bge0:2 zone zone1
The first method needs to reboot the zone. But the second one can be done on a live zone (exactly what I expected!)
Regards,
Xavier
-- ESC:wq ---------- Forwarded message ---------- Date: Thu, 6 Jul 2006 10:33:18 +0200 (CEST) From: Xavier Mertens <xavier@rootshell.be> To: sunmanagers@sunmanagers.org Subject: Second IP for a zone? Hi *, A question relative to zones IP address... My global zone runs on a server with a bge0 interface. zone1 runs with IP 1.1.1.1 on bge0:1. Now, I would like to configure zone1 to use also 1.1.1.2. Do I need to edit the zone config one more time (and use "add net") or this can be done "live" ? Regards, Xavier -- Speak softly and carry a cellular phone. _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:40:20 EDT