From: Kory Wheatley (wheakory@isu.edu)
Date: Wed Jul 05 2006 - 18:20:58 EDT
We are basically trying to get our EMC 300 to communicate with our
Solars 10 system. The Navisphere is installed and it can monitor the
system, but the part that we can't get working is we don't know how to
configure the controller or target id for the LPFC in the
/kernel/drv/lpfc.conf and /kernel/drv/sd.conf files. We know the WWPN
for each lpfc or hba to add in the lpfc.conf, but just not sure how to
configure the controller with the target id. Can you pick any target id
you want? If anyone has this time of configuration a sample of
documentation would be appreciated.
Here's what we receive in the /var/adm/messages log
Jul 5 15:53:08 blade3 lpfc: [ID 129691 kern.notice] NOTICE: lpfc0:
Firmware Rev 1.91A5 (T2D1.91A5)
Jul 5 15:53:08 blade3 lpfc: [ID 651404 kern.notice] NOTICE: lpfc0:
Fcode Rev 1.50a8
Jul 5 15:53:08 blade3 lpfc: [ID 535232 kern.notice] NOTICE: lpfc0:
WWPN:10:00:00:00:c9:53:56:8b WWNN:20:00:00:00:c9
:53:56:8b DID 0x1
Jul 5 15:53:08 blade3 lpfc: [ID 396126 kern.info] NOTICE: Device Path
for interface lpfc0:
Jul 5 15:53:08 blade3 pcisch: [ID 370704 kern.info] PCI-device: lpfc@5,
lpfc0
Jul 5 15:53:08 blade3 genunix: [ID 936769 kern.info] lpfc0 is
/pci@8,700000/lpfc@5
Jul 5 15:53:09 blade3 lpfc: [ID 728700 kern.warning] WARNING:
lpfc1:1303:LKe:Link Up Event x1 received Data: x1 x1
x8 x2
Jul 5 15:53:09 blade3 lpfc: [ID 728700 kern.info] NOTICE:
lpfc1:1304:LKw:Link Up Event ALPA map Data: x1ef0000 x0 x
0 x0
Jul 5 15:53:09 blade3 lpfc: [ID 129691 kern.notice] NOTICE: lpfc1:
Firmware Rev 1.91A5 (T2D1.91A5)
Jul 5 15:53:09 blade3 lpfc: [ID 651404 kern.notice] NOTICE: lpfc1:
Fcode Rev 1.50a8
Jul 5 15:53:09 blade3 lpfc: [ID 535232 kern.notice] NOTICE: lpfc1:
WWPN:10:00:00:00:c9:53:55:42 WWNN:20:00:00:00:c9
:53:55:42 DID 0x1
Jul 5 15:53:09 blade3 lpfc: [ID 396126 kern.info] NOTICE: Device Path
for interface lpfc1:
Jul 5 15:53:09 blade3 pcisch: [ID 370704 kern.info] PCI-device: lpfc@4,
lpfc1
Jul 5 15:53:09 blade3 genunix: [ID 936769 kern.info] lpfc1 is
/pci@9,700000/lpfc@4
Jul 5 15:53:10 blade3 pcisch: [ID 370704 kern.info] PCI-device: pci@1,
pci_pci0
Jul 5 15:53:35 blade3 lpfc: [ID 728700 kern.warning] WARNING:
lpfc0:0713:FPe:SCSI layer issued Target Reset Data: x
0 x0
Jul 5 15:53:35 blade3 lpfc: [ID 728700 kern.warning] WARNING:
lpfc1:0713:FPe:SCSI layer issued Target Reset Data: x
0 x0
Here is what our configuration shows:
/kernel/drv/lpfc.conf
fcp-bind-WWPN="10000000c953568b:lpfc0t20",
"10000000c9535542:lpfc1t21";
/kernel/drv/sd.conf
name="sd" parent="lpfc" target=20 lun=0;
name="sd" parent="lpfc" target=21 lun=0;
[demime 1.01b removed an attachment of type text/x-vcard which had a name of wheakory.vcf]
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:40:20 EDT