obp diag output interpretation

From: JESSE CARROLL (jesse-carroll@usa.net)
Date: Wed Jun 28 2006 - 12:11:07 EDT


If the diag-level is max or the key switch is set to diag the POST will
generate all kinds of interesting output. I found a Sun document for
interpreting POST results from the ESB Overall Status (doc id 78066) but I
canbt find anything that explains what is happening during the POST run.
For example:

0:0>Jump from OBP->POST.
0:0>diag-switch? configuration variable set TRUE.
0:0>Keyswitch in DIAGNOSTIC POSITION.
0:0>Diag level set to MAX.
0:0>Verbosity level set to MAX.
0:0>MFG scrpt mode set NORM
0:0>I/O port set to serial TTYA.
0:0>
0:0>Start selftest...
2:0>Parking core 1
3:0>Parking core 1
0:0>Parking core 1
1:0>Parking core 1

I think the first number is the CPU, but what is the second one? Has anyone a
reference for interpreting the POST output? I Googled, and searched
sunmanagers, docs.sun.com and sunsolve.
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers



This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:40:16 EDT