metareplace

From: Engle, Victor (Victor.Engle@csd.disa.mil)
Date: Tue Jun 13 2006 - 14:54:40 EDT

• Next message: naveen kumar sarabu: "showing two mount points"
• Previous message: Yashpal Nagar: "sun solaris short keys"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hello List,

I have a failed disk in a raid5 volume and when I try to metareplace it
I get a message that says it doesn't exist. The system is a V880 running
solaris 8. Any ideas?

Here is the output...

SUDO>HCl-$ metastat d6
d6: RAID
    State: Needs Maintenance
    Invoke: metareplace d6 c1t12d0s6 <new device>
    Interlace: 2048 blocks
    Size: 284407605 blocks
Original device:
    Size: 284409856 blocks
        Device Start Block Dbase State Hot Spare
        c1t8d0s6 23369 Yes Okay
        c1t9d0s6 23369 Yes Okay
        c1t10d0s6 23369 Yes Okay
        c1t13d0s6 23369 No Okay
        c1t12d0s6 43849 No Maintenance

SUDO>HCl-$ metareplace d6 c1t12d0s6 c5t1d2s5
metareplace: HCl: d6: c1t12d0s6: can't find component in unit

SUDO>HCl-$

Thanks,
Vic
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers

• Next message: naveen kumar sarabu: "showing two mount points"
• Previous message: Yashpal Nagar: "sun solaris short keys"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:40:06 EDT