SunFire V100 problem

From: Richard Lacroix (Richard.Lacroix@USherbrooke.ca)
Date: Mon Jun 12 2006 - 10:24:15 EDT

Next message: Beck, Joseph: "SUMMARY: reclaiming space after rm'ing files"
Previous message: Rob McMahon: "Fast Data Access MMU Miss"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi,

I'm having a problem with a SunFire V100. This is what a get when I do a
poweron from the lom:

lom>poweron
lom>
LOM event: +0h11m39s host power on
02/05/23 18:22
Hardware Power ON
Verifying NVRAM...Done
Bootmode is 8
Bootmode: diag-level => max
MCR0 = 37b2c206
MCR1 = 80008000
MCR2 = cf80f000
MCR3 = a9000222
Ecache Size = 512 KB
NVRAM Test
Icache Test
Dcache Test
MMU Test
Ecache Tag Addr Test
Ecache RAM Addr Test
Clearing E$ Tags Done
Clearing I/D TLBs Done
Probing memory
Done
MEMBASE=0xc0000000
MEMSIZE=0x20000000
Data Line Test
Core Memory Test
NV_malloc not supported with I2C NVRAM

Processor Speed = [Speed Jumper = 4] 548 MHz
Baud rate is 9600
8 Data bits, 1 stop bits, no parity (configured from lom)

Firmware CORE Sun Microsystems, Inc.
@(#) core 1.0.18 2002/05/23 18:22
Software Power ON
Verifying NVRAM...Done
Bootmode is 8
Bootmode: diag-level => max
MCR0 = 37b2c206
MCR1 = 80008000
MCR2 = cf80f000
MCR3 = a9000222
Ecache Size = 512 KB
Clearing E$ Tags Done
Clearing I/D TLBs Done
Probing memory
Done
MEMBASE=0xc0000000
MEMSIZE=0x20000000
Clearing memory...Done
Turning ON MMUs Done
Copy ROM to RAM (154720 bytes) Done
Orig PC=0x1fff0007edc New PC=0xf0f07f34

**********************************************
PSTATE=0000000000000015 TBA=00000000f0000000 DCU
Control=0000000000000000
AFSR=ffffffff80400080 AFAR=fffffffffffffff8 PIL=000000000000000f
I-SFSR=0000000000000000 D-SFSR=0000000000000000 D-SFAR=00000000000005e7
TL=0005 TT=0010 TPC=00000000f0004200 TNPC=00000000f0004204
TL=0004 TT=0010 TPC=00000000f0004200 TNPC=00000000f0004204
TL=0003 TT=0010 TPC=00000000f0004200 TNPC=00000000f0004204
TL=0002 TT=0010 TPC=00000000f0000200 TNPC=00000000f0000204
TL=0001 TT=0010 TPC=00000000f0003a00 TNPC=00000000f0003a04
**********************************************

This message is repeat until a press the switch to return on standby mode.
I cannot have the OK prompt.

What do you think. ? Is it a CPU problem?

Thank's

-- 
Richard Lacroix
Analyste en informatique
_____________________
Universiti de Sherbrooke
Faculti de Ginie
Ginie Ilectrique et Ginie Informatique
2500 Boul. Universiti
Sherbrooke, Qc
J1K 2R1 Canada
Til. (819) 821-8000 ext. 2877 Fax (819) 821-7937
  Richard.Lacroix@USherbrooke.ca <mailto:Richard.Lacroix@.USherbrooke.ca>
   www.usherbrooke.ca/gelecinfo <http://www.usherbrooke.ca/gelecinfo>
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers

Next message: Beck, Joseph: "SUMMARY: reclaiming space after rm'ing files"
Previous message: Rob McMahon: "Fast Data Access MMU Miss"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:40:06 EDT