From: Niranjan Parulekar (niranjan.p@emirates.com)
Date: Mon Jun 12 2006 - 05:17:33 EDT
Hi,
I need some help with JNI Tachyon HBAs.
I have a config problem with one of my Sun E10K servers running Solaris
8. This server has two JNI HBAs. One is connected to EMC via brocade
switch & is managed by powerpath while the other is connected to HDS via
McData & is not managed by any multipathing software. The second one was
connected recently. I've some LUNs allocated to this path from HDS which
are seen through EZFibre GUI but not detected by the OS. I tried
changing my sd.conf file but it didn't help. I also tried to do a LUN
level zoning in the fcaw.conf file but that didn't work as well.
Attached are my current sd.conf & fcaw.conf files . Please review these
files & let me know if you see any errors that would help fix my
problem.
[demime 1.01b removed an attachment of type application/octet-stream which had a name of sd.conf.stinger]
[demime 1.01b removed an attachment of type application/octet-stream which had a name of fcaw.conf.stinger]
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:40:06 EDT