From: Flames (jose.mmm@gmail.com)
Date: Tue Jun 06 2006 - 17:49:09 EDT
Hi all,
We had configured any domains for a e10k, the hba adapters are sbus
qla2200, the problem is that i can't see the wwn of this, i have installed
sfk 4.4x with patches:
108982-09
111412-19
113766-04
111095-26
111096-14
111097-22
111413-18
111846-08
114475-06
114877-10
119913-08
113767-08
and the driver qla2200 from qlogic (modinfo: qla2200 (QLogic FC Driver
v4.13.01)) , because from sun said that, the sbus qla2200 adapter don't work
with solaris qlc. In the boot, i can see the hba, but dont show the wwn,
with "prtconf -pv", or "prtpicl -v" dont show de wwn, prtpconf -pv ourput:
Node 0xfee2d65c
sbus-width: '64 bit'
sbus-parity: 'On'
interrupts: 00000004
manufacturer: 'QLGC'
device_type: 'scsi'
vendor-id: '1077'
device-id: '2200'
revision-id: '5'
subsystem-id: '2'
subsystem-vendor-id: '1077'
name: 'QLGC,qla'
compatible: 'pci1077,2'
reg: 00000001.00030000.00000400.00000001.00030800.00000400
Node 0xfee354dc
compatible: 'sd'
device_type: 'block'
name: 'sd'
I so have jni hba, and it show wwn perfect with prtconf -pv. Some idea?
Thx.
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:40:03 EDT