RSC configuration problem

From: Pandey, Abhimanyu (apandey@worcester.edu)
Date: Tue Jun 06 2006 - 11:53:37 EDT


Hello All,

I went thru the entire RSC admin manual. Installed and tested RSC
with:

# ./rscadm shownetwork

IP Address: 10.13.50.2

Gateway address: 10.13.1.1

Netmask: 255.255.0.0

Ethernet address: 00:03:ba:cd:37:9d

------------------------------------------------------------------------
------------------------------------------------------------------------
-------------------------------

# ./rscadm status

RSC Version v2.2.3

RSC Bootmon Version: v2.2.2

RSC Bootmon checksum: 10F5D0CC

RSC Firmware Version: v2.2.3

RSC Build Release: 01

RSC firmware checksum: 6D1CAD09

RSC firmware built: Jan 18 2005, 16:35:07

RSC System Memory Size 8 MB

RSC NVRAM Version = 4

RSC hardware type: 4

------------------------------------------------------------------------
------------------------------------------------------------------------
--------------------------------

# ifconfig -a

lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu
8232 index 1

        inet 127.0.0.1 netmask ff000000

eri0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index
2

        inet 10.13.50.1 netmask ffff0000 broadcast 10.13.255.255

        ether 0:3:ba:b0:37:af

#

------------------------------------------------------------------------
------------------------------------------------------------------------
-----------------------------

# ./rscadm version

RSC Version v2.2.3

RSC Bootmon Version: v2.2.2

RSC Firmware Version: v2.2.3

------------------------------------------------------------------------
------------------------------------------------------------------------
---------------------------------

I have done:

ok diag-console rsc

ok setenv input-device rsc-console

ok setenv output-device rsc-console

------------------------------------------------------------------------
------------------------------------------------------------------------
------------------------------

So everything seems to be fine except that connecting to the server with
RSC client just does not work.

------------------------------------------------------------------------
------------------------------------------------------------------------
-----------------------------------

Ping 10.13.50.2 times out (10.13.50.2 is the RSC, 10.13.50.1 is the
server)

------------------------------------------------------------------------
------------------------------------------------------------------------
-----------------------------------------

Platform: V890, Solaris 10 3/05

Thanks in advance. This is still a test server so not time critical,
but any insights are very appreciated.

Regards,

Abhimanyu.

"Everything that has been created is subject to decay and death.":
Buddha

[demime 1.01b removed an attachment of type image/jpeg which had a name of image001.jpg]

[demime 1.01b removed an attachment of type image/jpeg which had a name of image004.jpg]
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers



This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:40:02 EDT