From: Mohamed Gombolaty (mgombolaty@gmail.com)
Date: Wed May 24 2006 - 04:30:19 EDT
Dear All,
I have digged out an E4500 with 2 CPU cards and SCSI and fiber I/O
boards but without Hardisk board from our store room, and I have a
D1000 stoarage with 12 Hard disks that I want to use with the server.
At the OK prompt I do a probe-scsi-all and I can see 11 hardisks with
2 processor entry, but when I start to install Solaris 10 and after
finishing the Identification part, it gives a message No Disks found
and drops to shell, At the shell I type format and get also no disks.
I have read a lot of manuals and postings but none faced my same
problem, and this is the first time I deal with a storage scenario so
I am really going in circles around my self, can anyone put me on the
right track.
Thx
MAG
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:39:56 EDT