From: Dave Martini (martini@mrpeabody.llnl.gov)
Date: Mon May 01 2006 - 14:35:10 EDT
I did a test and I pulled the primary boot disk and now booted off the
mirror.
I put the primary boot disk back in and again booted from the mirror and
need to reactivate the mirrors. I want to replace it with the same exact
c#t#d# as before because the primary boot disk is still good I just
removed it temporarily to test booting off the mirror. What command
should be used?
My primary boot disk is
c1t0d0
and my mirror is
c1t1d0
I tried this command but that didn't work.
# metareplace -e d7 c1t0d0s3
metareplace: kos: d7: unknown metadevice type
# metastat
d9: Mirror
Submirror 0: d7
State: Needs maintenance
Submirror 1: d8
State: Okay
Pass: 1
Read option: roundrobin (default)
Write option: parallel (default)
Size: 20484288 blocks (9.8 GB)
d7: Submirror of d9
State: Needs maintenance
Invoke: metareplace d9 c1t0d0s3 <new device>
Size: 20484288 blocks (9.8 GB)
Stripe 0:
Device Start Block Dbase State Reloc Hot Spare
c1t0d0s3 0 No Maintenance Yes
d8: Submirror of d9
State: Okay
Size: 20484288 blocks (9.8 GB)
Stripe 0:
Device Start Block Dbase State Reloc Hot Spare
c1t1d0s3 0 No Okay Yes
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:39:43 EDT