From: Langdon, Nick (Nicholas.Langdon@comverse.com)
Date: Wed Apr 26 2006 - 07:02:23 EDT
Hello,
I have an E450 which is running solaris8 and has Veritas Volume Manager
4.0 installed. This particular server is connected up to our CX300 SAN,
I have allocated 4 luns on the SAN and have presented these to the
server. After a reconfigure reboot on the server I can now see the 4
luns from the SAN!
This particular server also has powerpath installed so the luns appear
as emcpower0c etc. Next I ran /etc/powervxvm install to bring the
emcpower devices into VxVM control which it did, below is the output
from vxdisk list:-
DEVICE TYPE DISK GROUP STATUS
c0t0d0s2 auto:sliced rootdisk rootdg online
c0t1d0s2 auto:sliced - - online
c2t0d0s2 auto:sliced rootmir rootdg online
c2t1d0s2 auto:sliced - - online
c3t0d0s2 auto:sliced - - online
c3t1d0s2 auto:sliced - - online
c4t0d0s2 auto:cdsdisk - - online
c4t1d0s2 auto:sliced - - online
c4t2d0s2 auto:simple - - online
c5t0d0s2 auto:sliced - - online
c5t1d0s2 auto:sliced - - online
c8t0d0s2 auto:none - - online invalid
c8t1d1s2 auto:none - - online invalid
c8t1d2s2 auto:none - - online invalid
c8t1d3s2 auto:none - - online invalid
emcpower0c simple - - online
emcpower1c simple - - online
emcpower2c simple - - online
emcpower3c simple - - online
As you can see the four devices have been bought in as type simple, is
this normal practice?
Any advice on this would be great!
Cheers
Nick
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:39:40 EDT