From: Kristopher Briscoe (kris.briscoe@gmail.com)
Date: Tue Apr 04 2006 - 16:22:22 EDT
All:
Hardware: Sun E6500
OBP: 3.2.30
3.3v 33/66mhz pci riser board
part #: 5014128
Qlogic qla4010c (pci gigabyte network card
Problem: We installed the pci io board with the above riser board and the
system completed post without a problem. Once the pci network card was
installed the system failed post with the following message.
============================================
{0} ok @Hardware Power ON
0,0>FATAL ERROR
0,0> At time of error: POST was testing Board 0 Centerplane
0,0> Diagnosis: Board 0, centerplane pin, connector pin, AC
0,0> Diagnosis: Board 7, centerplane pin, connector pin, AC
0,0> Diagnosis: Board 9, centerplane pin, connector pin, AC
0,0> Diagnosis: Board 11, centerplane pin, connector pin, AC
0,0> Diagnosis: Board 15, FHC, AC
0,0> Diagnosis: Board 15, AC
0,0> Diagnosis: Board 15, AC
0,0> Diagnosis: Board 15, centerplane pin, connector pin, AC
0,0> Diagnosis: Board 15, Dtag A (UPA Port 0), AC
0,0> Diagnosis: Board 15, Dtag B (UPA Port 1), AC
0,0> Diagnosis: Board 15, module connector, Device at UPA port, AC
0,0> Diagnosis: Board 15, centerplane, board connector, AC, any other AC
0,0> Diagnosis: Board 15, AC, any other AC
0,0> Diagnosis: Board 15, UPA PORT Device, AC
0,0> Diagnosis: centerplane terminators
0,0>Log Date: Apr 4 19:54:31 GMT 2006
0,0>
0,0>RESET INFO for CPU/Memory board in slot 0
0,0> AC ESR 00002800.00000000 FTA_PERR FT_SHERR
0,0> DC[0] 00
0,0> DC[1] 00
0,0> DC[2] 00
0,0> DC[3] 00
0,0> DC[4] 00
0,0> DC[5] 00
0,0> DC[6] 00
0,0> DC[7] 00
0,0> FHC CSR 00050200 LOC_FATAL SYNC NOT_BRD_PRES
0,0> FHC RCSR 02000000 FATAL
0,0>
0,0>RESET INFO for CPU/Memory board in slot 7
0,0> AC ESR 00000400.00000000 FT_ARBERR
0,0> DC[0] 00
0,0> DC[1] 00
0,0> DC[2] 00
0,0> DC[3] 00
0,0> DC[4] 00
0,0> DC[5] 00
0,0> DC[6] 00
0,0> DC[7] 00
0,0> FHC CSR 00050020 LOC_FATAL SYNC BRD_LED_M
0,0> FHC RCSR 02000000 FATAL
0,0>
0,0>RESET INFO for CPU/Memory board in slot 9
0,0> AC ESR 00000400.00000000 FT_ARBERR
0,0> DC[0] 00
0,0> DC[1] 00
0,0> DC[2] 00
0,0> DC[3] 00
0,0> DC[4] 00
0,0> DC[5] 00
0,0> DC[6] 00
0,0> DC[7] 00
0,0> FHC CSR 00050020 LOC_FATAL SYNC BRD_LED_M
0,0> FHC RCSR 02000000 FATAL
0,0>
0,0>RESET INFO for CPU/Memory board in slot 11
0,0> AC ESR 00000400.00000000 FT_ARBERR
0,0> DC[0] 00
0,0> DC[1] 00
0,0> DC[2] 00
0,0> DC[3] 00
0,0> DC[4] 00
0,0> DC[5] 00
0,0> DC[6] 00
0,0> DC[7] 00
0,0> FHC CSR 00050020 LOC_FATAL SYNC BRD_LED_M
0,0> FHC RCSR 02000000 FATAL
0,0>
0,0>RESET INFO for CPU/Memory board in slot 15
0,0> AC ESR ffffffff.80000000 FHCERR HWERR RAMPERR FTA_PERR FTC_PERR
FT_SHER
R FT_ARBERR FT_DIDERR UPA_PERR DT_PERRA DT_PERRB FTUPAOV FOUPAOV PREQOV
0,0> DC[0] 00
0,0> DC[1] 00
0,0> DC[2] 00
0,0> DC[3] 00
0,0> DC[4] 00
0,0> DC[5] 00
0,0> DC[6] 00
0,0> DC[7] 00
0,0> FHC CSR 00050020 LOC_FATAL SYNC BRD_LED_M
0,0> FHC RCSR 02000000 FATAL
7,0>FATAL ERROR
7,0> At time of error: POST was testing Board 7 Centerplane
7,0> Diagnosis: Board 7, centerplane pin, connector pin, AC
7,0> Diagnosis: Board 9, centerplane pin, connector pin, AC
7,0> Diagnosis: Board 11, centerplane pin, connector pin, AC
0,7,>*Diagn sir Bord ,abcmplYCmop
ns, boar`Hardware Power ON
0,0>FATAL ERROR
0,0> At time of error: POST was testing Board 0 Centerplane
0,0> Diagnosis: Board 7, centerplane pin, connector pin, AC
0,0> Diagnosis: Board 9, centerplane pin, connector pin, AC
0,0> Diagnosis: Board 11, centerplane pin, connector pin, AC
0,0> Diagnosis: Board 15, FHC, AC
0,0> Diagnosis: Board 15, AC
0,0> Diagnosis: Board 15, AC
0,0> Diagnosis: Board 15, centerplane pin, connector pin, AC
0,0> Diagnosis: Board 15, Dtag A (UPA Port 0), AC
0,0> Diagnosis: Board 15, Dtag B (UPA Port 1), AC
0,0> Diagnosis: Board 15, module connector, Device at UPA port, AC
0,0> Diagnosis: Board 15, centerplane, board connector, AC, any other AC
0,0> Diagnosis: Board 15, AC, any other AC
0,0> Diagnosis: Board 15, UPA PORT Device, AC
0,0> Diagnosis: centerplane terminators
0,0>Log Date: Apr 4 20:02:20 GMT 2006
0,0>
0,0>RESET INFO for CPU/Memory board in slot 0
0,0> AC ESR 00003000.00000000 FTA_PERR FTC_PERR
0,0> DC[0] 00
0,0> DC[1] 00
0,0> DC[2] 00
0,0> DC[3] 00
0,0> DC[4] 00
0,0> DC[5] 00
0,0> DC[6] 00
0,0> DC[7] 00
0,0> FHC CSR 00050200 LOC_FATAL SYNC NOT_BRD_PRES
0,0> FHC RCSR 02000000 FATAL
0,0>
0,0>RESET INFO for CPU/Memory board in slot 7
0,0> AC ESR 00000400.00000000 FT_ARBERR
0,0> DC[0] 00
0,0> DC[1] 00
0,0> DC[2] 00
0,0> DC[3] 00
0,0> DC[4] 00
0,0> DC[5] 00
0,0> DC[6] 00
0,0> DC[7] 00
0,0> FHC CSR 00050020 LOC_FATAL SYNC BRD_LED_M
0,0> FHC RCSR 02000000 FATAL
0,0>
0,0>RESET INFO for CPU/Memory board in slot 9
0,0> AC ESR 00000400.00000000 FT_ARBERR
0,0> DC[0] 00
0,0> DC[1] 00
0,0> DC[2] 00
0,0> DC[3] 00
0,0> DC[4] 00
0,0> DC[5] 00
0,0> DC[6] 00
0,0> DC[7] 00
0,0> FHC CSR 00050020 LOC_FATAL SYNC BRD_LED_M
0,0> FHC RCSR 02000000 FATAL
0,0>
0,0>RESET INFO for CPU/Memory board in slot 11
0,0> AC ESR 00000400.00000000 FT_ARBERR
0,0> DC[0] 00
0,0> DC[1] 00
0,0> DC[2] 00
0,0> DC[3] 00
0,0> DC[4] 00
0,0> DC[5] 00
0,0> DC[6] 00
0,0> DC[7] 00
0,0> FHC CSR 00050020 LOC_FATAL SYNC BRD_LED_M
0,0> FHC RCSR 02000000 FATAL
0,0>
0,0>RESET INFO for CPU/Memory board in slot 15
0,0> AC ESR ffffffff.80000000 FHCERR HWERR RAMPERR FTA_PERR FTC_PERR
FT_SHER
R FT_ARBERR FT_DIDERR UPA_PERR DT_PERRA DT_PERRB FTUPAOV FOUPAOV PREQOV
0,0> DC[0] 00
0,0> DC[1] 00
0,0> DC[2] 00
0,0> DC[3] 00
0,0> DC[4] 00
0,0> DC[5] 00
0,0> DC[6] 00
0,0> DC[7] 00
0,0> FHC CSR 00050020 LOC_FATAL SYNC BRD_LED_M
0,0> FHC RCSR 02000000 FATAL
0,0>ERROR: TEST=Centerplane,SUBTEST=Centerplane and Arbiter Check ID=f.1
0,0>Component under test: Board 0 Centerplane
0,0> ARB_SYNCED is set, Board 0, BCSR=70001001
0,0> ************* Board Alignment Problem, SYNC Timeout
============================================
Anyone have thoughts about what this could be? We've veriifed that this is
the correct riser board to support the qla4010c card. My interpretation of
the message indicates that the card is causing some type of distoration or
voltage deviation on the centerplane. Has anyone seen this before? Any
thing special I need to do at the openprom to support this card?
Thanks,
KRis-
-- Kristopher T. Briscoe Sr. UNIX Engineer 404.353.3223 _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:39:29 EDT