From: Vijay Raghavan (Vijay_Raghavan01@infosys.com)
Date: Tue Apr 04 2006 - 08:03:08 EDT
Hello
Is there a command to find what are the ports assigned for a particular
process .I run ps command and all the process are shown, anyway
To find what ports are assigned for the processes. Do we need to do some
process accounting or any other thing to be activated.
Thanks
VIJAY RAGHAVAN
**************** CAUTION - Disclaimer *****************
This e-mail contains PRIVILEGED AND CONFIDENTIAL INFORMATION intended solely
for the use of the addressee(s). If you are not the intended recipient, please
notify the sender by e-mail and delete the original message. Further, you are
not to copy, disclose, or distribute this e-mail or its contents to any other
person and any such actions are unlawful. This e-mail may contain viruses.
Infosys has taken every reasonable precaution to minimize this risk, but is
not liable for any damage you may sustain as a result of any virus in this
e-mail. You should carry out your own virus checks before opening the e-mail
or attachment. Infosys reserves the right to monitor and review the content of
all messages sent to or from this e-mail address. Messages sent to or from
this e-mail address may be stored on the Infosys e-mail system.
***INFOSYS******** End of Disclaimer ********INFOSYS***
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:39:29 EDT