multipath + volume manager + show disks

From: Flames (jose.mmm@gmail.com)
Date: Mon Apr 03 2006 - 07:35:30 EDT

• Next message: Beck, Joseph: "ldap naming service"
• Previous message: grove@zeta.org.au: "Sun Local Patch server with Solaris 10?"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi,

How i can see all the disk with multipath+volume manager?:

vxdmpadm listctlr all
CTLR-NAME ENCLR-TYPE STATE ENCLR-NAME
=====================================================
c1 Disk ENABLED Disk
c6 IBM_SHARK ENABLED IBM_SHARK1
c7 IBM_SHARK ENABLED IBM_SHARK1
c6 OTHER_DISKS ENABLED OTHER_DISK
c7 OTHER_DISKS ENABLED OTHER_DISK
pseudo VPATH_SHARK ENABLED VPATH_SHARK0

 vxdisk list
DEVICE TYPE DISK GROUP STATUS
VPATH_SHARK0_0 sliced c6t2d3s2 datosdg online nohotuse
VPATH_SHARK0_1 sliced c6t2d2s2 datosdg online nohotuse
VPATH_SHARK0_2 sliced c6t2d0s2 datosdg online nohotuse

vxdisk list VPATH_SHARK0_0
....
....
Multipathing information:
numpaths: 1
vpath1c state=enabled

here only show numpaths=1, but i have multipath by two ways, how i can see
all the disk in the device name "VPATH_SHARK0_0" ??

Thx.
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers

• Next message: Beck, Joseph: "ldap naming service"
• Previous message: grove@zeta.org.au: "Sun Local Patch server with Solaris 10?"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:39:28 EDT