Flashing Power Indicator on Sun Monitor

From: Crist Clark (crist.clark@globalstar.com)
Date: Fri Mar 31 2006 - 19:14:26 EST


I've got a Sun monitor here that doesn't seem to work. This is a rather
common (around here anyway) GDM-5010PD model. It is one of the dual
input monitors. Neither seems to work. When I power the monitor up,
the light over the power switch in the center comes on green, but after
a few seconds begins to flash amber. Usually, that light goes solid
amber if there is no signal or the monitor goes to sleep. I get the
flashing amber whether using the Sun jack or the VGA. The systems it
doesn't work with work fine on other monitors.

So, is my monitor busted or something simple to fix? I can't seem to
Google documentation on these monitors, just a sea of resellers.

-- 
Crist J. Clark                               crist.clark@globalstar.com
Globalstar Communications                                (408) 933-4387
The information contained in this e-mail message is confidential,
intended only for the use of the individual or entity named above.
If the reader of this e-mail is not the intended recipient, or the
employee or agent responsible to deliver it to the intended recipient,
you are hereby notified that any review, dissemination, distribution or
copying of this communication is strictly prohibited.  If you have
received this e-mail in error, please contact postmaster@globalstar.com
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers


This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:39:28 EDT