From: John Horne (john.horne@plymouth.ac.uk)
Date: Wed Mar 29 2006 - 16:42:47 EST
Thanks go to Robert A. Fisher for his reply - the only one. Basically I
wanted the non-X equivalent of the xev/xmodmap commands. As he suggested
loadkeys/dumpkeys will do the trick. I have created a short script which
sets the keys correctly on our KVM. Can't get the UK pound sign to be
set though! :-)
Thanks,
John.
On Fri, 2006-03-17 at 14:44 +0000, John Horne wrote:
> Hello,
>
> We have a SunFire 280 and a V440, both running Solaris 9, connected to a
> KVM switch. The model is RKP117-801e, not sure who made it but it is
> about 2 years old now. I gather the later ones are actually
> Sun-compatible. Until earlier this week I never bothered to sort out a
> keyboard mapping for it so that it will work according to the keys on
> the keyboard - e.g. the double-quote was displayed as an @ sign and
> vice-versa, etc.
>
> I have now sorted out the mapping whilst logged in using CDE and running
> the xev/xmodmap commands. However, once I go to the command-line (from
> the login screen) or boot in to single-user mode. The current mappings
> don't work - they expect X to be running.
>
> Does anyone know how I can configure keyboard mappings to work from
> single-user mode/the command-line?
>
>
> Thanks,
>
> John.
>
-- --------------------------------------------------------------- John Horne, University of Plymouth, UK Tel: +44 (0)1752 233914 E-mail: John.Horne@plymouth.ac.uk Fax: +44 (0)1752 233839 _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:39:28 EDT