From: William (willay@gmail.com)
Date: Fri Mar 24 2006 - 05:54:12 EST
Hello list,
I have a batch of 6 V210's with the XVR-100 product installed, during
the o/s installation I had the display working by setting the
output-device variable and rebooting. Everything seemed fine until we
had these racked up and in production, we are trying to use a new KVM
system on the boxes but they are not responding on VGA at all.
We have tried having the KVM installed correctly while the machines
reboot but we are still getting a blank screen.
When we plug in a standalone monitor and Sun KB (taking the KVM out of
the equation) we get a white screen on the monitor and nothing else.
Using prtdiag I can confirm it shows the graphics card as :
'SUNW,XVR-100 (Display) SUNW,375-3181 okay /pci@1d,700000/SUNW,XVR-100@1'
Thank you for your time.
Regards,
Will
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:39:23 EDT