From: Aditya Nagalla (aditya.n2@rediffmail.com)
Date: Thu Mar 23 2006 - 01:40:05 EST
Hi ,
On ultra-10 machine ,i tried to plumb the interface at sngle
user-mode.
Its not geeting activate.
I use the following command to activate
the interface (hme0).
# ifconfig hme0 plumb
When i run
"watch-net" and "test net" Network status is ok at ">ok prompt " and
interface is ok.
Whats the problem ?
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:39:22 EDT